EnduraSoft® 6.0

Use for permanent horse, deer and cattle fences.

• 25 years probable life
• white/black/white color
• 1/4" diameter
• Very visible
• Fair portability
• 41 ohms per 1000 ft
• 1800 lb breaking strength
• Polyester--more resistant to ultraviolet light
• 3 tinned copper and 3 stainless steel filaments are intertwined

Soft to touch and comfortable to handle.

$0.12 per foot

1. Attach a terminal insulator to end post.
2. Tie end of rope to terminal insulator.
3. Unroll rope along the fence line.
4. Insert line posts.
5. Insert rope in the line posts at the right height(s) for your animals.
6. Attach insulators (preferably notched PI 21n #369200) to corner and end posts.
7. Tie rope to terminal insulator and spring at far end post. By hand, pull it tight enough to eliminate sagging between posts. Tie off by hand, or use a RopeLink 2.0 (#256220).
8. Use one of our reels to rewind and store rope.
9. Install and connect energizer to a ground rod and the fence. Turn on energizer. Check to make sure voltage is over 2000 volts.

• For Sheep:
3-strand fence--35", 24", 12"
5-strand fence--36", 27", 20", 13", 7"


• For Cattle:
3-strand fence--40", 27", 15"
2-strand fence--34", 22"
1-strand fence--34"


• For Horses:
2-strand fence--48", 24"


• For Gardens:
2-strand fence--15", 6"


• For Deer:
  
5-strand fence--50", 40", 30", 20", 10"
2-strand fence--48", 30"
3-D fence--inside: 48", 18"; outside: 34"

If cutting the rope, lightly burn the ends with a lighter or match to avoid unraveling.