12v leads for IntelliShock 20B & HotShock B4
Enables a 12 volt battery to be attached via the input pins on the Intellishock 20B and HotShock B4.
Can be used with spade terminals and large car-type terminals.
If using a 12v battery with spade terminals, first remove the red and black alligator clips from 12v leads. Simply pull the blue and red wires away from alligator clips.
Attach spades of the leads to battery terminals. Red wire with red clip is positive, and blue wire with black clip is negative. With other end of 12v leads, attach red line into "+" (positive) post on bottom of energizer lid. Attach blue wire into "--" (negative) post. Place battery in energizer case.
Save the clips for use when trouble-shooting energizer and/or battery problems.
Make sure there is a good connection at both ends.
You must be logged in to leave a review. Please log in.