12v leads for IntelliShock 20B & HotShock B4

Enables a 12 volt battery to be attached via the input pins on the Intellishock 20B and HotShock B4.

This item qualifies for FREE Ground Delivery. » Details
ITEM #	DESCRIPTION	AVAIL.	WEIGHT	PRICE	QTY
117314	12v leads for IntelliShock 20B & HotShock B4	In Stock	0.20	$16.00

To view and print this document, please download Adobe Reader.

Specs	Positive wire (red) and negative wire (blue) are 38" long. Plastic positive clip (red). Plastic negative clip (black).
Benefits	Can be used with spade terminals and large car-type terminals.
Installation	If using a 12v battery with spade terminals, first remove the red and black alligator clips from 12v leads. Simply pull the blue and red wires away from alligator clips. If using a battery with large car-type terminals, leave alligator clips in place. Attach spades of the leads to battery terminals. Red wire with red clip is positive, and blue wire with black clip is negative. With other end of 12v leads, attach red line into "+" (positive) post on bottom of energizer lid. Attach blue wire into "--" (negative) post. Place battery in energizer case.
Precautions	Save the clips for use when trouble-shooting energizer and/or battery problems.
Trouble Shooting	Make sure there is a good connection at both ends.