Energizer Kit - Battery

Intellishock 20B

• .28 max. stored joules
• .27 max output joules
• .21 joules output in moist soils
• .25 joules in dry soils
• Will power 3000' of multi strand fence, 4 164' sheep/goat nets and 2 of the 164' poultry nets. All distances are dependent on amount of grass/weed load on the fence.
• Draws 10 mA per hour on a weed free fence. Draws 33 mA per hour on a weedy fence.
• A 12v 100 ampere hour battery will last approximately 250* days on a clean fence and 75* days on a weedy fence. *Assumes being drawn down to 40% between recharges.
• Load-sensing circuitry that reduces the energy drain from the battery by up to 70% when the air is dry and the fence is clean of weeds.
• LED light indicates if fence voltage is low.
• LED light indicates if battery is adequately charged or not.
• Sits on its own support stake. Less obvious and less prone to theft.
• Support stake doubles as a ground rod.
• Dry cell battery life will double by adding a solar panel to it.
• Includes wires for connecting to the fence and ground stake.
• Solar panels are sold separately.

• Tester body: 5" long x 1 3/4" wide
• Cable: 5' long
• Ground probe: 4" long

IntelliShock 20B:

1. Connect red lead's bare wire end to fence terminal and clip other end of lead to fence
2. Connect black lead's bare wire end to ground terminal and clip other end of lead to ground rod.
3. Push black on/off button to turn on.
4. Test fence.

For Fence:

1. Insert the probe of the tester into the soil.
2. Remove your hand from the metal portion of the probe (to avoid a shock).
3. To get a voltage reading, touch the metal clip (on the top of the tester) to the electrified fence you wish to test.
4. The tester will light up according to the voltage at that location on the fence.
5. Remove the tester from the fence and the probe from the soil. Do not remove the probe by pulling the insulated wire.

For Energizer:

1. Turn off energizer.
2. Disconnect ground wire and fence wire from energizer.
3. Turn on energizer.
4. Touch probe from tester to ground terminal on energizer (be sure to hold onto the insulated wire and not the metal probe!)
5. At same time touch the fence hook on tester to fence terminal on energizer.
6. The tester should light up to 6000 volts or more.

IntelliShock 20B:

• Make sure the energizer is turned off before working on the fence or the energizer.
• Use on size appropriate fences.

Intellishock 20B-Our unique 2-Year Warranty: If an energizer fails within 2 years from the purchase, Premier will replace the module/unit at our cost (unless the reason for its failure is customer abuse or neglect). Your credit card will be charged for the replacement but you will receive full credit when the failed item is back at Premier. Your only cost is shipping the failed item to us. If the original energizer is over 2 years old, we will repair and/or replace it, but you pay for the repair cost and freight.