EzeReel™ Brackets

For attaching EzeReel, complete with support frame, to wood post or steel T post.

• Galvanized steel
• Both brackets are 8" across
• "Fingers" are 3" long

Quick way to end your fence line. You can hang the spool on the post and not have to terminate the conductor. Requires reels with hardware in order to use these brackets.

For wood posts:

1. Attach bracket to wood post at desired height using 2 screws or nails (not included).
2. Hang EzeReel's metal support frame over the 2 upright fingers of bracket.
3. Tighten conductor as needed.

1. Remove the 2-prong portion of bracket that is shipped inside the triangular piece.
2. With the finger-like projection of triangular piece pointing up, slide the triangle over top of T-post and position at desired height.
3. Place the triangular bracket so it is positioned between 2 studs on front of post.
4. Place the 2-prong portion that is welded together, inside the triangular piece, on back side of T post (one rod on each side of back of T post) and press down until tight. (This wedges the bracket tight against T post.)
5. Hang the EzeReel's metal support frame over the 2 upright fingers of bracket.
6. Tighten conductor as needed.