Charge Meter

This meter measures the amount of charge left in the battery--so you know when to recharge.

This item qualifies for FREE Ground Delivery. » Details
ITEM #	DESCRIPTION	AVAIL.	WEIGHT	PRICE	QTY
125000	Charge Meter	In Stock	0.4	$34.00

E-mail a Friend

Specs	Plastic body measures 4 1/2" H X 1 1/2" D X 2 1/4" W Positive wire (red) is 13" long Negative wire (black) is 13" long
Benefits	To know at a glance how much power you can count on and how much charging your battery may need. Use with any 12 volt deep cycle battery and for most high grade automotive batteries.
Installation	Before taking a reading of any battery, first shut off all loads (any device that is attached to the battery). Batteries must be tested "at rest", otherwise the reading will not be accurate. Similarly, if the battery has just been recharged (within 10 hours or so), disconnect the battery from the charger and remove the surface charge in order to obtain an accurate reading. The surface charge may be removed by connecting the battery to a "load" such as a motor, lights, or other devices that the battery is connected to. For best reading, allow the battery to normalize for about 60 seconds after the load has been removed and then take the reading. After the battery has normalized, depress the switch and read the energy level. The meter will automatically light up when the switch is depressed. The gauge displays the percent of charge remaining in the battery. For example, a 60% reading means that 60% of the battery's capacity is available. A reading of 100% means the battery is fully charged. A reading in the "FULL" range means that the battery has a surface charge or that it is under charge. A reading in the "EMPTY" range mean that the battery is dead and should be re-charged.
Precautions	Use an automotive battery with a life rating of 48 months or more.
Trouble Shooting	Our rule of thumb: 40% for deep cycles; 80% for common vehicle batteries.

Electric Netting

PermaNet® 12/48/3 (25' x 48"), single spike

Item # 206625 - In Stock

$69.00

It's a "no worries" poultry net.

After customers use normal net, they eventually say, "a great product but I'd prefer to move it less often." We're users of netting like you are, and we agree. For this reason, we designed a net intended to stay in place longer--but still can be moved when desired.

While the mesh portion is the same as standard 48 in. PoultryNet, PermaNet 12/48/3 has much stronger and larger posts with longer and larger steel ground spikes. That's why this net resists sagging and withstands the effects of wind, rain, ice and snow better than normal net.