PowerPosts™ Portable Fence Posts

Use for extra support in net and as line posts for temporary fences.

• All PowerPosts have multiple front loading clips with angled entry for tape twine or wire
• 1/4" rope will need to be fed in from the side
• Stem and base have 3 ribs on each side for strength
• 8" anodized steel step-in spike, 3/8" diameter
• Measurements from bottom of foot peg to center of each clip starting from the bottom going up is as follows:
• 21" post = 1.5", 4.5", 8", 11.5", 15", 20"
• 35" post = 1.5", 4.5", 8", 11.5", 15", 20", 22", 26.5", 31", 33"
• 48"post = 1.5", 4.5", 8", 11.5", 15", 20", 22", 26.5", 31", 32.5", 44.5", 46.5"
• 21" is only available in green
• 35" and 48" are available in gray or green

Quick and easy to put in, take out and move around.

Set post spike on ground at desired location. Step on the ledge to push the post into the ground. Attach conductors at desired height.

These items DO NOT qualify for Free Ground Delivery.

These posts are not good for corners or where there is a lot of up/down strain. They are not meant to be a permanent post.

In very dry/hard soils drilling a pilot hole in the ground may be beneficial to putting the post in. You can also wet the soil at the location you plan on putting in the post to soften the ground.