Rope-To-Energizer Link

Insulated cable is 48" long. Stainless steel wing nut and bolt with a rope connector.

Makes quick secure connections from the energizer to rope fences.

Connecting to rope

1. Loosen wing nut on connector.
2. If using the Rope to Energizer Link to hold the tension on the rope: slide rope into both sides of connector. If you are using the Rope to Energizer Link to make an electrical connection only: slide the connector on to 1 rope.
3. Re-tighten wing nut.

1. Loosen nut on positive/fence terminal on energizer.
2. Connect the bare wire of the Rope to Energizer Link to the fence terminal on the energizer.
3. Tighten nut back down. Make sure the nut on the terminal is snug to ensure a solid connection.

This item does not work well for tape or Intellitwine fences.