Fence Fault Finder
- Hard plastic body with LED display (2" x 1.5")
- 7" x 3" x 1"
- 9 volt battery included
- Effective for locating direction of voltage flow on a fence line.
- Easy to read
- No ground probe
Directional arrow may not be accurate when testing on electrified nets.
When the unit reads "LL" or "low batt," the battery on the tester (not the energizer's battery) is low and needs to be replaced.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Electric NettingItem #206620 -
Designed to be left in one place for months or years, but still easy to move if needed. It's sturdier than other nets with regular posts.$199.00
Write a Review
You must be logged in to leave a review. Please sign in.
Woody W from Catskills, New York
This thing is amazing. It pointed toward a fault where I knew there were too many weeds. I used a lot of Round-Up, and am eager to see what it says when they're dead and the bottom conductor runs clear. Forget the part of the instructions that says you have to insert the wire in the groove to find faults. I use rope conductors, which don't fit easily, and using the metal contact that sticks out the top works fine for detecting faults.
Elton M from Central Illinois
I lost the same fence tester I had in standing wheat so I went into the house within the hour and ordered another one. That is how good this tester(fault finder) is. I would not have electric fence and sheep without a tester like this one.
Amy C from Michigan
This tool has proven to be extremely helpful in pinpointing shorts in our electric fence. No longer do we have to walk every inch of fence in search of the source of the problem. We had considered getting this product years ago but didn't because of the price. It is worth the price! It is definately one of those prized time saving tools you're glad you have on the farm.