HoriSmart N80 220v AC Plug-In Energizer
While Supplies Last. All sales are final, no returns.
All HoriSmart feature higher voltages—which make them more effective against wildlife and when the grass is brown and the soil dry. N80 is for shorter fences.
Few users understand that energizers powerful enough to cope with heavy weed contact produce far more joules/pulse than is necessary to deter animals—when no green grass exists (i.e. spring, autumn and winter).
The excess pulse energy (beyond that which is needed) is a source of unnecessary risk and pain to humans and animals.
HoriSmart energizers have a patented CPN circuit/system that maintains high voltages but keeps pulse energy (joules) at a “no more than needed” level for 60 seconds—to allow humans and animals to move from the fence.
True wide-impedance output curve. Wide-impedance units perform better over a wider range of fence conditions and conductors than standard low-impedance units. Areas where wide-impedance units excel are: high resistance conductors (stainless steel polywire/hot tape/electrified netting); minimal ground rods; livestock or wildlife with dry skin or hair (poultry, deer, goats); and very dry soils.
Safe to use with all polywires, polyropes, tapes and electrified nets.
- Connect insulated cable (stripped back 2-3" on ends) to the fence terminal on energizer, run the cable to the fence line and connect.
- Then run a second length of cable from the ground terminal (with ends stripped again) on the energizer to the ground rod.
- Secure to ground rod with a clamp.
- Plug into outlet and test fence.
Make sure the energizer is unplugged before working on the fence or the energizer.
- Turn off energizer.
- Disconnect ground wire and the fence wire.
- Plug energizer back in.
- With fence tester, put the ground probe to the ground terminal on the energizer and the metal loop at the top of the tester to the fence/positive terminal. The reading you get tells you how well the energizer is working without any other variables. If there is a very low voltage (under 1500v) or no voltage, then the energizer may have a problem. If the voltage is high (greater than 3000v) then the trouble lies with your fence. Most energizers put out between 5000v and 8000v when there is no load (i.e. no fence hooked up).
If an energizer fails within 2 years from the purchase, Premier will replace the module/unit at our cost (unless the reason for its failure is customer abuse or neglect). Your credit card will be charged for the replacement but you will receive full credit when the failed item is back at Premier. Your only cost is shipping the failed item to us. If the original energizer is over 2 years old, we will repair and/or replace it, but you pay for the repair cost and freight.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.