Page 7 - 653610 Digital Edition

Others Premier
Premier Heat Lamp
Heat Lamp and New! Lamp Stand
(Lamp and stand sold separately.)
The “Premier” orange heat lamp is
superior to all others we’ve tested in
its strength, safety, protective guard
and hanging system.
Use standard or infrared (heat)
bulbs no larger than 250 watt. Bulbs
are available separately (see below).
Has a 16 ft cord that provides the
“reach” needed.
Our heat lamp stand (made by folks
who make the heat lamp) eliminates
need to develop/find a secure spot
from which to hang a heat lamp!
Allows users to easily adjust the
height of the lamp and thus control
the temperature of the brooder.
Top of stand is 46" above the
ground. Can be used with braided
cord and/or snap clips (see p. 6) to
hang lamp just above the bedding.
Premier Heat Lamp, 3 lb... #557000 $30.00
Heat Lamp Stand, 3.6 lb... #540070 $29.00
Bulb and grate comparison
(above) Bulbs in “Others” lamp are exposed
to animals and bedding if they fall. Not so
with the Premier lamp’s safety features.
Bulbs – Smooth Glass
“Never-loose” base.
Sold/priced in pkgs of 2.
175w clear (2 pk), 0.7 lb ..#557030 $12.00
175w red (2 pk), 0.7 lb ..... #557031 $13.00
250w clear (2 pk), 0.7 lb ..#557032 $12.00
250w red (2 pk), 0.7 lb.....#557033 $13.00
Bulbs – Pressed Glass
Much more shock
resistant than smooth glass.
Same “never-loose” base.
Sold/priced in pkgs of 2.
Warning: Because these bulbs
feel so firm and strong some users
make the mistake of over-twisting them into the
heat lamp—and deform the threads of the lamp’s
fixture. When this happens the lamp’s fixture
must be replaced.
175w clear (2 pk), 1.5 lb...#557034 $13.00
175w red (2 pk), 1.5 lb.....#557035 $14.00
• “Never-loose” base
• Guaranteed to provide
6 months of non-stop life
Conventional infrared lamps are
cheap—but they usually fail within
a month or two. Why?
1. The base breaks away from
the glass bulb because the high
temperature causes the cheap
adhesive to degrade.
2. Both glass and filament are so
fragile that minimal impact
shatters them.
InterHeat bulbs address both
issues. They initially cost more to
buy but they are cheaper over time
because they last years instead a
few weeks.
If a never-loose base ever becomes loose,
we will replace at no cost!
Never-Loose Bases.
They don’t use
cement adhesive.
Instead, the base
screws into the bulb.
A weld of solder
holds the base onto
the threads.
Other bulbs.
Attached with
cement adhesive.
Heat causes the
cement to lose its
adhesive property.
The base then breaks
away from the bulb.
Base screws into the bulb Large solder
Small solder Cement adhesive only
New! Bulbs that last! Bulb comparison—
Premier’s new bulb vs Others’ typical bulbs
www.premier1supplies.com • 1-800-282-6631 HEAT LAMP & LAMP STAND 07
• Safer than other heat lamps
• Versatile and effective
• Durable
Lamp Stand
Collapsed dimensions:
6"L x 6"W 24"H
Erected dimensions:
24" footprint when assembled.
46" tall. Some slight assembly is
required. Lamp adjusts from 12" to 20"
above the floor.
Heat lamp height is easily
adjusted by changing the
position of the heat lamp
holder. Braided cord (see p. 6)
lowers the heat lamp further.
Adjustable
Heat Lamp
Holder
13-1/2" L
To adjust lift,
twist, reset, and
reverse twist.
Hook for
hanging lamp
New!
Lamp Stand