PowerBilt® Panels
Use these PowerBilt® panels for lambing pens, gates and fence panels.
Reinforced galvanized welded wire panels. 3" square holes offer less risk of head entrapment and panel heights of 36" and 48".
For extra strength, they are reinforced with 3/8" rods at top, bottom, sides and through the middle. 3/16" diameter internal rods.
California Residents: Proposition 65 Information
Shipping
*Items #965600, #965700, #965800 and #965900 are subject to shipping charges due to oversized and/or overweight items. Use the following table as a general estimate. Exact shipping charges may vary based on your location. We will contact you via phone or email with a quote before the product is shipped.
Estimated Shipping Cost for PowerBilt® Wire Panels
Panel Size |
Description | Shipping Cost | ||
---|---|---|---|---|
Zone A | Zone B | Zone C | ||
36" x 60" 48" x 48" |
Dimensional Surcharge† | $50 | $175 | $200 |
1–8 panels‡ | Plus $12/per panel | |||
48" x 72" 48" x 96" |
LTL Delivery Fee | $250 | $300 | $400 |
1–8 panels‡ | Plus $12/per panel |
Benefits
Specs
- 3" square holes
- 3/8" dia. rods and 3/16" dia. rods
- 2 heights
- 5 lengths
- Hot-dip galvanized steel
Tips
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Wire Panels and Accessories
Wire Panel Hinge, 36" tall
Item #965402 -Provides a strong, reliable connection that is also a 360° hinge. Use to easily attach wire livestock panels and gates together.
$4.00 -
Handling Equipment
Snap Clip, Stainless Steel
Item #965406 -Use to connect wire panels and hang poultry waterers and feeders.
$12.00 -
Handling Equipment
Snap Clip, Zinc Plated
Item #965405 -Use to connect wire panels and hang poultry waterers and feeders.
$2.00 -
Wire Panels and Accessories
3/16" dia. Braided Cord, 8 ft
Item #965410 -Braided nylon cord for general utility around the farm. Hang poultry waterers and feeders. Attach wire panels and gates.
$1.50 -
Handling Equipment
Ground Rod and/or Connecting Pin, 3'
Item #151200 -Effectively ground energizers or firmly secure handling equipment. Galvanized pin is resilient to rust and wear.
$8.00 -
Wire Panels and Accessories
Eyebolt
Item #936100 -Plated steel bolt for holding connecting pins, tie gates shut and a multitude of farm uses.
$2.10 -
Handling Equipment
Linking Stake
Item #917800 -Linking stake for connecting panels, gates, chutes of sheep and goat handling or feeding systems.
$11.30 -
Handling Equipment
Lag Bolt Connector
Item #917820 -Used extensively on the Premier farms to securely connect gates and panels via linking stakes.
$3.68
Write a Review
You must be logged in to leave a review. Please sign in.
Lois S from Maine
Exactly as described. Tall and sturdy enough to contain large goat (Nubian wether). Premier has prompt and knowledgeable customer service. Shipping was fast and reasonably priced for weight and size of product.
Patty K from Texas
Good condition, heavy duty, arrived quickly - no shipping cost!
Cindy S from Missouri
Well worth the money. We use these to feed round bales to horned goats. They get all they need through the holes and don’t get their heads stuck. Also a little enrichment so they’re not too bored. Made my life so much easier not having to haul squares around the property. Light enough panels that I as a woman can do this by myself. Had a few jump in the middle and get their legs stuck. Used these as a temporary kidding pen. A taller version would lessen the chance of jumping into or out of the enclosures.
James & Anita G from Wisconsin
Love these heavy duty wire meshed panels, kids don’t get their heads stuck, very durable & versatile. Please keep these in stock! Always a winner!
Karen B from Idaho
HEAVY (I think my UPS man hates me), tough-built, rigid panels! No wire edges for animals to cut themselves on or to tear holes in my clothing as I step over, as happens with the flimsier, floppier cut-up farm store hog panels I’ve been using. I bought two each 36” x 48” and 36” x 60” to see how I’d like them for Nigerian Dwarf kidding pens. I LOVE THEM. I’ll be buying more before next kidding season! Currently they are reconfigured as a creep area with the addition of the Creep Feeder Gate.