IntelliRope® PE 4.5

Use for temporary and permanent electric fences for all livestock.

• 10 year probable life
• white/black/white color
• 3/16" diameter
• Good visibility
• Very portable
• 41 ohms per 1000 ft
• 750 lb breaking strength

Good for all sites but particularly for humid climates because polyethylene resists mildew the best. Excellent built-in elasticity.

Approximate cost per foot is $0.04.

1. Attach a terminal insulator to end post.
2. Tie end of the rope to terminal insulator.
3. Unroll rope along the fence line. (Using Premier's reels makes this easier.)
4. Insert line posts.
5. Insert rope in the line posts at the right height(s) for your animals.
6. Attach insulators (preferably notched PI 21n #369200) to corner and end posts.
7. Tie rope to terminal insulator and spring at far end post. By hand, pull it tight enough to eliminate sagging between posts. Tie off by hand, or use a RopeLink 2.0 (#256220).
8. Use one of our reels to rewind and store rope. EzeReels™ (#238600) can be set on the ground next to fence. MiniReels (#237600) are best hung from the fence.
9. Install and connect energizer to a ground rod and the fence. Turn on energizer. Check to make sure voltage is over 2000 volts.

• For Sheep:
3-strand fence--35", 24", 12"
5-strand fence--36", 27", 20", 13", 7"


• For Cattle:
3-strand fence--40", 27", 15"
2-strand fence--34", 22"
1-strand fence--34"


• For Horses:
2-strand fence--48", 24"


• For Garden:
2-strand fence--15", 6"

If cutting the rope, lightly burn the ends with a lighter or match to avoid unraveling.