Ask The Expert


 New Topic  |  Go to Top  |  Go to Topic  |  Search   Newer Topic  |  Older Topic 
electroNet rewiring end posts
Author: Kevin 
Date:   04-28-13 11:27

Early this spring had a field fire and the fence was still in the field the end post got melted with the bottom three wires. Is it possible to go down the line were the wires are good and make them the new end post? Looks like all the wires go up to the main clip. Can I get new clips?
Reply To This Message
 
Re: electroNet rewiring end posts
Author: gordon 
Date:   04-30-13 12:40

Make sure that you cut the wires long enough so you can tie them to the post and still run all of the wires to the top.You can use a screwdriver to open the old clip and pliers to squeeze it back onto the wires at the top of the fence. If that does not work we do have replacements.
Reply To This Message
 Forum List  |  Threaded View   Newer Topic  |  Older Topic 


Reply To This Message
 Your Name:
 Your E-mail:
 Subject:
Image Verification: