Sign up for Premier1's Newsletter

Creep Feeder Gate

Gives lambs and kids "adult-free" access to creep feed.


937001 Creep Feeder Gate, 40" tall In Stock 29.00 $108.00
937002 Additional rod & roller, 40" tall In Stock 2.80 $9.00
937003 Creep Feeder Gate, 45" tall* In Stock 33.00 $124.00
937004 Additional rod & roller, 45" tall In Stock 3.00 $11.00


Item #937001 has an additional handling fee of $20 per item.

Item #937003 has an additional handling fee of $70 per item.

Common Uses

  • Gives lambs & kids "adult free" access to creep feed.
  • Allows guard dog puppies ability to come and go from sheep/goats and food.

  • 41" wide - from the outside of the eye loop to the outside of the eye loop.
  • 38" wide - gate itself.
  • Hot-dip galvanized to improve appearance and longevity.
  • Comes with 5 vertical bars.
  • As shown, vertical bars are spaced 6" apart.

Creep gate parts:

  • Horizontal bar—1/2" diameter steel rod with white plastic roller. 6 height possibilities (18" to 28" with increments of 1" to 2"). Held in place with a spring-loaded clip.
  • Vertical bar—1/2" diameter rods with white plastic outer rollers. Gate has 11 holes along the bottom and top. To adjust, pull rod and drop it into any hole. (We find we need all the holes as the lambs grow.)
  • Eye loops. Two eye loops at ends allow attachment with a steel Connecting Pin (sold separately, see under accessories tab above); to wire panels, metal bar gates and/or wooden panels.


Hot-dip galvanized products have triple the useful life in humid, acidic climates (many barns!).

Both horizontal and vertical internal bars can be altered to allow the openings to "grow" with the lambs or kids. White plastic pipe on rods spin freely when lambs move through them.


To connect to panels, etc., use Connecting Pin and Eyebolt. See under "Accessories" tab above.

Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Item # 565000 - In Stock
First introduced to the USA by Premier over 15 years ago. Has been the "gold standard" design ever since.
Item # 565200 - In Stock
Red rubber teats are the most durable.
Item # 565300 - In Stock
Natural latex teats have the most "teat-like" feel. We use latex to get them started and then switch them over to red rubber (#565200).
Item # 622020 - In Stock
Provides the entire nutritional requirements for the lamb or kid from its second day of life through weaning.
Item # 564800 - In Stock
Ideal for use as bucket teat units. Flat sides sit against panels and reduces likelihood of being knocked around by assertive lambs.
Item # 965700 - In Stock
3 in. square holes offer less risk of head entrapment and panel heights of 36 in. and 48 in.
Item # 565400 - In Stock
Latex teats have the most "teat-like " feel.
Item # 151200 - In Stock
Ground rods are essential for energizers to work.
Average Rating: 4.2 out of 5
Number of Reviews: 12 customers reviewed this product.

Write a Review

Date: February 14, 2015
Pandora S from north carolina
Would you recommend this product? Yes
this is a great product, I just need to purchase a couple of extra rods to keep one of my yearlings out
Date: February 14, 2015
Pandora S
Would you recommend this product? Yes
This was my first purchase of the creep gate, it was easy to install and is very sturdy. I have a yearling doe that also loves it. She can eat the kids feed and sleep under their heat lamp. I would sure buy another one, I can move the yearling.
Date: February 5, 2015
William/anna D from Maryland
Would you recommend this product? Yes
This is our second creep gate because we are expanding, not because the first wore out. The quality is excellent. No complaints at all.
Date: May 31, 2014
Phyllis M from Virginia
Would you recommend this product? Yes
It is sturdy but we found the added holes not helpful where they were located - without the option to make the end openings smaller - we had a real Houdini adult who kept finding her way in until we blocked the height to the bottom - even though we have Boers.
Date: May 14, 2014
Scott/Kylene A from TN
Would you recommend this product? Yes
Very well built, but I would recommend a couple of design changes-particularly if you are trying to keep out small yearlings (Shetlands). First, the horizontal bar needs a lower setting. Second, the spacing of the holes for the vertical rods results in larger openings on the far left and right. There needs to be another set of holes closer to each end.

For customers, definitely order 3 or 4 extra rods if you have a small breed.
Date: January 18, 2013
janice c from oregon
I know this is a great product, but the shipping was $95 for the 45" gate so I had to cancel my order. It would have been nice to have known this before I went through with the order. Premier 1 did call me to let me know the shipping issue before shipping, however, so it was easy to cancel order.
Date: October 11, 2012
Leslie G from Washington
Would you recommend this product? Yes
Great design. My kids are still getting used to it but were able to go through without a problem. The platic rollers are a good idea. Even if they don't use it to pass through yet I see them rubbing their heads over the rollers.
Date: April 26, 2011
christopher f
Would you recommend this product? Yes
Liked the gate alot.Should come standard with extra bar for no addtional fee. Basically useless without it. Smaller ewes and yearlings can get in the gate without it.
Date: March 31, 2011
Mary S from SE Louisiana
Would you recommend this product? Yes
Perfect for our lambs. Very nice product: well made, clever design. Design shows lots of thought and a designer who *used* the product. Love Premier.
Date: May 3, 2010
Angela A
Would you recommend this product? Yes
This is a very sturdy creep gate. I really like the pins to attach to my goat panels. We set the horizontal bar on the lowest setting and the yearling angora goats were still able to get through. We added another horizontal bar several inches lower by ziptying on an old, broken broom stick. I would like to see modifications to this gate to allow the user to lower the horizontal bar further than currently allowed. When the kids are too old for creep feeding I will be taking the gate to the local welder and have him add on more holes below the existing holes. Overall, I do like this gate and will make my own modifications to keep the smaller angora yearlings out.
Date: March 29, 2010
Sara D
Would you recommend this product? Yes
Very durable creep gate that is great for keeping mature goats out of the creep feeder. I would like more holes for width adjustment to keep out yearlings while still allowing nursing kids access to the creep feeder. We modified one of our creep gates with a 2" board on each outside opening with the rest of the vertical bars at their smallest spacing, which works quite well.
Date: March 3, 2010
Frank S
Would you recommend this product? Yes
Really well made and adjusts to meet all my needs. Very nice.
Date: February 5, 2010
Dana C
Would you recommend this product? Yes
This is a great creep gate, very sturdy heavy metal. Our larger goats have tried to get threw it to no avail and it has held up to their attemps.