Ask The Expert


 New Topic  |  Go to Top  |  Go to Topic  |  Search   Newer Topic  |  Older Topic 
Setting up Electronet
Author: Terrell Beck 
Date:   05-13-09 09:42

I assume the first post can be tied to an existing wooden post, but can it also be tied to a steel post or a small tree? Is there a danger of the existing post grounding or shorting out the electronet?

And what about posts put in to secure corners? Can they be wooden or steel?
Reply To This Message
 
Re: Setting up Electronet
Author: Mandy 
Date:   05-13-09 10:45

Terrell,
The end posts on the nets can be tied to any post/tree. You just need to make sure that the end post is back off of whatever you are tying to about 2-3". That way the net won't short out on your anchor. Corner posts can be tied to wood or steel. I put the steel posts about 6" behind the net and use something non-conductive to tie the steel/wood posts to the post in the net. Again, just make sure that the net doesn't touch the corner post and it won't short out.
Reply To This Message
 Forum List  |  Threaded View   Newer Topic  |  Older Topic 


Reply To This Message
 Your Name:
 Your E-mail:
 Subject:
Image Verification: