Ask The Expert

 New Topic  |  Go to Top  |  Go to Topic  |  Search   Newer Topic  |  Older Topic 
electronet wiring
Author: David Wooten 
Date:   01-28-15 20:34

I'm hoping to set up two nets more or less in line, separated by a 70' section of pre-existing fence, each net ending in dense brush on the non-fence end. Can i put the solar energizer in the fence area (where it is sunny) and wire it to both nets, or do the nets absolutely need to be wired in series (requiring a much longer stretch of wiring to get from sunny area to one end and back)
Reply To This Message
 
Re: electronet wiring
Author: Sara 
Date:   01-29-15 08:53

Yes, you can connect the netting to the Pre-Existing Fence.
• Make sure your energizer is not a high impedance. This will melt the netting.
• You need to use a wide or low impedance energizer.
• Also test the fence to make sure you have a reading of 3000 volts or more.

If you have more questions, please call me at 800-282-6631.
Thank you, Sara
Reply To This Message
 
Re: electronet wiring
Author: David Wooten 
Date:   01-29-15 22:56

The pre-existing fence is wood, not electric. I think testing the fence is the right idea.

Thanks
Reply To This Message
 
Re: electronet wiring
Author: Sara 
Date:   01-30-15 08:52

You can connect to the clips at one end of the netting's. So if it is sunny were you are connecting the two fence together this will work.
Reply To This Message
 Forum List  |  Threaded View   Newer Topic  |  Older Topic 


Reply To This Message
 Your Name:
 Your E-mail:
 Subject:
Image Verification: