Blackhawk 92 Shearing Comb

★ ★ ★ ★ ★ (10) Read reviews »

All purpose flared comb for shearing and blocking. 3.3 mm thick, 92 mm wide with medium to long bevels.

For blocking show sheep
For shearing farm/range flocks
For shearing llamas and alpacas

See our comparison chart for choosing the right cutter and comb for each situation.

Blackhawk 92 Shearing Comb

Item #860500 | Weight 0.20 lbs

In Stock

$28.00
QTY:
Personalization (Laser Imprinting), each

Item #868600 | Weight 0.00 lbs

In Stock

$1.50
QTY:

Videos & Data

Install a Comb and Cutter on a Premier Shearing Machine

Instructions/Diagrams:

Unable to view the files?

A PDF viewer is required for viewing and printing. Click the icon below to download the FREE Adobe Reader.

Common Uses

Use with Premier’s 4000s Shearing Machine for:

Blocking show sheep
Shearing sheep, llamas and alpacas

Specs

13 tooth
3.3 mm thick, 92 mm wide
Medium to long bevels
Flared on one side
Fits any 3" shearing head.

Customization

We can imprint initials on combs. This service may delay delivery by one day. Add Item #868600 to your cart and provide your initials during checkout.

Precautions

Proper Storage

Remove blades/combs/cutters from clipper or shearing machine.
Clean blades/combs/cutters immediately after use by using a small brush or blowing off any excess dirt or hair. Cover with oil to reduce risk of rust. High carbon steel clipper blades will rust overnight. Rust will destroy both the edge and polished surface of blades.
Store clipper/shearer and blades away from solvents, chemicals and moisture. Never leave them where they can be damaged by accidental impact.

Sharpening and Cleaning

Premier offers an in-house resharpening service for all combs, cutters and blades. Rapid turnaround—most are sharpened within 24 hours.
To reproduce the quality of the cutting edge on the clipper blades that came from the factory, a lapping machine must be used. Most other methods are, in our experience, inferior. In addition to producing a cutting edge that won’t last, some methods can permanently damage blades. The most common “culprit” is using large high speed grinding wheels that are used to sharpen cutters and combs.

Warning: Clipper blades/cutters/combs that have been sharpened by inferior methods or inexperienced people may be damaged to such an extent that they can never be restored to a satisfactory cutting capability. The same is true of blades that have become too heavily pitted by rust.

Troubleshooting

Make sure the comb and cutter are installed as described in the instructions.
Make sure the comb name can be read on outside when placed on head.
Make sure to have 1/8" space from end of comb (bevel) to tip of cutter.
Make sure the edge of the cutter does not go over the side of the comb.
Make sure the tension is set correctly.

Accessories

Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.