Brace Pins
Use these galvanized steel pins for securing strain posts to cross braces in single and double-H braces.
California Residents: Proposition 65 Information
Specs
- 3/8" diameter
- 5" and 10" long
- Galvanized steel
How to Use
- For brace posts, drill a 3/8" hole at desired height through end post.
- With a hammer, drive 10" pin through the post, leaving about 1" out so the brace wire can hook over it. (This is on the outside of end post.)
- Drill another 3/8" hole in end of wood cross post and slide it onto the pin that is coming through the inside. (Use a 5" pin for the other end of cross post.)
- Drill a 3/8" hole 3" deep at desired height into end post.
- With a hammer, drive the pin into hole.
- Drill another hole into the end of cross brace and put brace onto the pin.
- Follow same steps at the other end of cross post.
Tip
- Angles formed by horizontal bar, end post and brace wire are wrong. Result? The end post lifts up as you see to the right. Solutions? Either lower the brace bar or use a longer cross bar (10 ft or more). We now use an 8 ft long post as a brace bar but we set it only 36" above the soil. The brace wire attaches at the same 36" point.
- End post too small and/or not buried deep enough. For fences 3 to 4 ft tall, use 8" diameter end posts. Drive or set them 4 ft deep.
- Using floating braces. Regrettably we tried this design. They all ultimately failed.
- Live wires touching brace wires. When this occurs, as it does when posts move (like those shown at right have done), contact will occur and the fence will short out.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
High-Tensile Accessories
Round In-Line Strainer
Item #330100 -Handle inserts in to high-tensile electric fence in-line strainers for leverage during tensioning.
$3.50 -
High-Tensile Accessories
TwistLink™, 13" long
Item #336500 -Use this handy, reusable TwistLink for connecting and/or splicing high-tensile or woven wire. 13" long.
$1.10 -
High-Tensile Accessories
Speed Brace Cable
Item #336840 -A brace wire system that’s quick to install, simple and effective. Use on any high-tensile fence.
$8.25 -
Fencing
Staples, 1.6" Barbed for High-Tensile Wire, per lb.
Item #360200 -Heavy-duty barbed staples for affixing tube insulators or non-electrified high-tensile (HT) wire to wood posts.
$3.50 -
High-Tensile Accessories
Wire Twister
Item #408300 -Use this tool to twist wire and terminate the fence line. Can be used with high-tensile and woven wire.
$1.80
Write a Review
You must be logged in to leave a review. Please sign in.
Lee E from Indiana
Great product for a good price.
Kevin K from Wisconsin
Perfect for the job.
Castellia A from Texas
Great price, quick shipping, and decent quality!
Daryl F from Tennessee
A search for for this needed item revealed ridiculous pricing by some of the suppliers. The down to earth cost I found at Premier will definitely have me coming back for my future needs. Thank you.
Robert G from Arkansas
First time purchase from this company. After checking various websites I found Premier 1 had exactly what I was looking for at the best price available. After placing the order, it shipped right out within a day or so and was delivered very quickly. Before the order shipped I contacted customer service to see if a change could be made and it was done over the phone with no problem. I appreciate that type of responsiveness from a company and would highly recommend Premier 1.