Brass Ferrules for Netting
- 9.13mm long
- 6.9mm wide at the back
- .51mm thick
How to Use
- Place the replacement conductor next to the broken end of a horizontal conductor in the netting.
- Using a pliers, crimp the ferrule together so that both conductor pieces are cinched tightly by the ferrule.
- Do the same to the other end.
- The ferrule is metal and should both physically and electrically connect the broken pieces.
Write a Review
You must be logged in to leave a review. Please sign in.
Wendy H from Ohio
These made the repair to the ElectroNet fence (that had been cut in half by the lawnmower) quick, easy, and secure. I just cut out the damaged portion and reconnected the appropriate lines. And the fence is hot again.
Gary F from New Yoark
These are too small to actually crimp well on a tied square knot. They definitely will not work on the bottom cord of ElectroStop netting that is tied in a square knot. They will only crimp well on unknotted cord. A larger size is definitely needed for crimping on the large bottom cord. Unfortunately, there do not seem to be any alternatives to the offered one size ferrule. While they do not work well apparently they are your only choice—use them or do without.
Judianne D from Rhode Island
These little ferrules are one of a kind. I tired to find them from another source and did not have any luck. These little ferrules are expensive at 0.14 cents a piece from Premier, so do not drop too many in the grass. When repairing rips in my electranet, they do a fantastic job when it comes to securing two pieces of electrical twine. However, when trying to repair the black bottom line of the electranet, it is frustrating because they are not wide enough to crimp down the two lines together. Premier should make two sizes.
Trisha A from Texas
This tiny little part transforms Premier1 fencing into a repairable, durable fence. We've been using their electric netting for several years now. Over time, the fencing needs to be repaired due to normal wear and tear or unusual events. We love the fact that Premier1 offers everything that we need to extend the life of their high-quality fencing!
Ambling B from Maryland
I bought a packet of these because there are so few that come with the standard repair package that comes with a new ElectroNet. Between the sheep and the groundhogs, I need to repair several nets every year. It's a LOT easier to crimp the wires to gather rather than to wrap them with electrical tape, and stronger too. You don't want to be without a package of these handy. The only downsides are that they're REALLY small and easy to lose on the field, and they're not easy to crimp in a way that one end folds over the other (to make the repair stronger). It would be easier to make a good strong crimp if one side of the "U" were a bit longer than the other.