Ceramic Cutter
Professional-grade ceramic cutter. Holds cutting edge up to 3 times as long as normal shearing cutters.
See our comparison chart for choosing the right cutter and comb for each situation.
Specs
- 4-point ceramic shearing cutter
- Fits Premier's 4000s Shearing Machine, Heiniger Shearing Equipment (Handpieces and Machines) and Lister Lasers
- Works with all 13, 17, 20, 22, 23 tooth shearing combs
Benefits
Precautions
- Cannot be resharpened
- If dropped, ceramic cutters may break
- Will NOT fit Premier’s old (silver/black) shear head or Oster/Sunbeam shearing heads
Proper Storage
- Remove combs and cutters from the shearing machine.
- Clean combs and cutters immediately after use by using a small brush, or blowing off any excess dirt or hair.
- Store combs and cutters away from solvents, chemicals and moisture. Never leave them where they can be damaged by accidental impact.
Troubleshooting
- Make sure the comb and cutter are on as described in the instructions above.
- Make sure the comb name can be read on outside when placed on head.
- Make sure to have 1/8" space from end of comb (bevel) to tip of cutter.
- Make sure the edge of the cutter does not go over the side of the comb.
- Make sure the tension is set correctly.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Professional Shears
#10 White Clipping Oil, 4 oz bottle
Item #258200 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$3.20 -
Clipping and Shearing Machines
Premier 4000s Shearing Machine Only (no comb or cutter)
Item #829000 -Sheep shearing machine for those new to shearing or with small to medium flocks.
$324.00 -
Clipping and Shearing Machines
Heiniger XTRA Shearing Machine Kit
Item #830753 -Proven sheep shearing machine trusted by shepherds all over the world. Perfect for dagging, belly clipping or light shearing.
$575.00 -
Professional Shears
Spirit Shearing Comb
Item #861200 -An excellent comb for beginner shears. Easy to control while providing a quality finish. Can be resharpened by Premier.
$25.00 -
Professional Shears
Heiniger Alpaca Shearing Comb, each
Item #830722 -Nine-tooth shearing comb for alpacas. Also used for llamas and similarly fibered animals. Swiss-made by Heiniger.
$30.00 -
Professional Shears
Heiniger Camelid Shearing Comb
Item #862600 -Specialized 13-tooth comb for shearing llamas, alpacas, camels, vicuñas and guanacos. Swiss-made by Heiniger.
$51.00 -
Combs and Cutters - Large
Comb Lifter
Item #862700 -Leaves a layer up to 0.75" of uncut fiber on camelids, goats and other hair species.
$5.00
Write a Review
You must be logged in to leave a review. Please sign in.
Michael A from Tx
The ceramic cutter is the way to go for me they last a lot longer cooler just keep oiled and I also use air to keep everything clean.
The only down fall is they don't resharpen them when that happens they will be the perfect cutter.
Windrush Alpaca from New Mexico
Only in an emergency will I use metal cutters again, I have three or four sharp ones, I keep in reserve. I started using the ceramic cutters last year. First time use I was able to shear 16 alpacas on one set (new cutter - resharpened comb) I was impressed. Follow up sets not quite as good but still better than metal. I was able to shear 53 alpacas laced with New Mexico sandy dirt with 4 ceramic cutters and 7 combs, (two machines helped to keep blades sets cooler. that's an average of over 13 per cutter. I'm good with that.
John from Wisconsin
Just an update: I have switched exclusively to using this cutter and resharpening I do on progressively finer diamond hones and with no loss in performance. Still getting over 20 alpaca on one cutter. Works fine with my old style LGS machine but not the new style due to the softer plastic drive gear. But I still love these cutters.
Diane G from Oregon
These cutters worked great while they were sharp. However, I did NOT realize at the time of purchase that these could not be resharpened. I would not have bought them if I had known that.
Cheryl W from Vermont
I'm giving these 5 stars for the way these cutters work. They are fabulous. But if you are a klutz like me, don't bother, because if you drop them they break, just like fine china. Then you'll say "there's 15 bucks down the drain".