Creep Feeder Gate
Gives lambs and goat kids "adult free" access to creep feed and allows guard dog puppies ability to come and go from sheep/goats and food.
Specs
- Height: 40" or 45"
- Width: 41" - from the outside of the eye loop to the outside of the eye loop and 38" - gate itself.
- Hot-dip galvanized to improve appearance and longevity.
- Comes with 1 horizontal bar and 5 vertical rods.
- As shown above in photo, vertical bars are spaced 6" apart.
Creep gate parts:
- One horizontal bar—1/2" diameter steel rod with white plastic roller. 6 height possibilities (18" to 28" with increments of 1" to 2"). Held in place with a spring-loaded clip.
- Five vertical rods—1/2" diameter rods with white plastic outer rollers. Gate has 13 holes along the bottom and top. To adjust, pull rod and drop it into any hole. (We find we need all the holes as the lambs grow.)
- Eye loops—Two eye loops at ends allow attachment with a Connecting Pin (sold separately); to wire panels, metal bar gates and/or wooden panels.
Benefits
Hot-dip galvanized products have triple the useful life in humid, acidic climates (many barns!).
Both horizontal and vertical internal bars can be altered to allow the openings to "grow" with the lambs or kids. White plastic pipe on rods spin freely when lambs move through them.
Installation
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Handling Equipment
Ground Rod and/or Connecting Pin, 3 ft
Item #151200 -Effectively ground energizers or firmly secure handling equipment. Galvanized pin is resilient to rust and wear.
$5.80 -
Handling Equipment
Linking Stake
Item #917800 -All parts of Premier's handling system use stake and eye connections. They are stronger and more versatile than all other methods.
$8.00 -
Wire Panels and Accessories
Eyebolt
Item #936100 -Use to hang heat lamps, poultry waterers and feeders. Also attach gates or panels.
$2.06 -
Handling Equipment
Lag Bolt Connector
Item #917820 -Use a lag bolt connector and linking stake with handling equipment and connecting wire panel gates to wooden posts.
$2.40 -
Wire Panels and Accessories
48" x 48" PowerBilt Wire Panel, 3" holes
Item #965700 -Reinforced galvanized welded wire panels. Great for building lambing jugs, gates, fence lines and many other projects.
$66.00 -
Lambing and Kidding Aids and Accessories
Advance® Milk Replacer for lambs, 8 lb bag
Item #622020 -Milk replacer for lambs and goat kids.
$31.00 -
Teats and Nipples
Red Latex Teats
Item #565400 -For use with Bucket Teat Units to feed orphan lambs and kids. Latex is easier for newborns to operate.
$2.05 -
Teats and Nipples
Natural Latex Teats
Item #565300 -Natural latex teats for feeding lambs and kids via bucket teat units. Best for weak animals or those under 1 week of age.
$2.05 -
Teats and Nipples
Red Rubber Teats
Item #565200 -Attach to Bucker Teat Units to fed orphan lambs and kids. Rubber stands up to sharp toothed orphans for some time.
$1.55 -
Teats and Nipples
Bucket Teat Unit
Item #565000 -For feeding orphaned lambs and kids via milking buckets. Attach a rubber or latex teat for the animals to nurse.
$3.40 -
Buckets and Troughs
Square Bucket only w drilled hole(s), 2 gallon
Item #564805 -Predrilled buckets ideal for use as teat units. Flat sides sit against panels and reduces likelihood of being knocked around by assertive lambs.
$9.50 -
Buckets and Troughs
Square Bucket only w drilled hole(s), 4 gallon
Item #564804 -Predrilled buckets ideal for use as teat units. Flat sides sit against panels and reduces likelihood of being knocked around by assertive lambs.
$12.30 -
Buckets and Troughs
EzeLid
Item #564802 -Fits our 2 and 4 gallon buckets. Easy to remove while providing a secure covers for feeds.
$2.60
Write a Review
You must be logged in to leave a review. Please sign in.
Scott & Vicki G from Pennsylvania
We love our Premier creep gate! We bought our first one 4 or 5 years ago and have used it hard. It's held up great and we're getting ready to purchase a second one for our other barn. We have ours mounted to a sheet of plywood that acts as a pen divider. We cut a hole in the plywood slightly smaller than the gate and mounted the gate fast to the plywood using U-bolts. It works perfectly for our needs, couldn't be happier!
Karen B from Inland Northwest
I was put off by the price, but this is a very heavy duty, tough built item that will last forever. Using this with the PowerBilt panels for a creep feeding/heat lamp/sleeping area for Nigerian Dwarf kids. Had to put the vertical rods as close as they could go to exclude the yearling does who had no trouble squeezing through the as-shipped settings. I use a PowerBilt panel to cover the half that now has no rods (I’ll be ordering more rods!), and move the panel over to cover the whole creep gate at night to completely separate kids so I can milk mornings.
Ellen E from Texas
Panels work great so far. Tape came off during shipping and some parts were missing ( minor pvc) I would like to have at least a 8 foot gate size for larger herds with a large creep feeder setup
Sheryl M from Missouri
Another excellent product from Premier 1! This creep gate is solid and functions exactly as it is intended. It is easy to use and my lambs took right to it.
Amber C from California
Well built panel. We had purchased others in the past from other vendors and they just did not hold up. This panel is tough--putting up with ewes that are determined to get into the lambs feed. We have purchased multiple after trying one out in our Cotswold pen. Easy to adjust. Highly recommend.
