Cut Out Switch
- 7"L x 2"W
- 4-3/4" knife
- All connections are stainless steel
- Attach with screws or nails (not included) to a location where the lever can be switched up and down. It's best to mount switch with yellow handle of lever on top. The switch is "on" when the lever is up.
- Use insulated wire designed for high voltage to run from power source to the lower of the 2 contact terminals.
- Use another piece of insulated wire to run from top contact terminals to the fence.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Mamdouh Z from Florida
Pleased with all products and prompt shipping. Thank you!
Kathleen M from Tennessee
Decent price, quick delivery.
Randy W from West Virginia
I purchased two of these for cut-outs at gates. Ordering and shipping was fast and easy. These heavy duty cut-outs were definitely better quality than available at local farm supply and worth the few extra bucks.
Installation was a breeze on wood post. Be sure to hang with yellow handle up while in hot connection so the disconnect handle stays down to keep disconnected until raised back to connect position. Also use a insulated feed in and out wire so you don’t grab a hot wire when moving switch. Ask my wife how I know that.
Alan H from Maryland
Easy to install, seems heavy duty.
Henry S from North Carolina
It's a cut out switch — I needed to replace one of another brand which had a problem and decided to try this one. No problem installing it, Works perfectly. Stainless steel predicts it will have a very long working life.