- Galvanized steel pipe with elastic webbing.
- Can support large, adult sheep and goats (without horns).
- Adjustable width for all sizes.
- Included support rope for large/heavy sheep. (Prevents elastic webbing from over-stretching.)
- Length is 40 inches.
- Maximum width is 16 inches.
- Minimum width is 10 inches.
- Bottom "legs" are 14 inches.
- Replacement webbing is available.
- Can be folded flat for easy storage and transporting with some disassembly.
We've introduced several improvements over the previous version:
1.) Elastic webbing
- A thick weave of elastic shock cord has replaced the string net we used previously. The elastic web springs back into place when the ewe leaves the chair reducing the risk of entanglement. The webbing quickly hooks over built-in rivets for easy replacement. Included support rope can be used for heavy animals to prevent over-stretching.
- This simple device prevents the animal’s hind legs from getting caught in the mesh. On occasion we’ve had to chase down a ewe that’s made off with our deck chair because of this very reason—not often, but it has happened.
3.) Quickly make size adjustments
- When using our original chair, a wrench was needed to make side-to-side adjustments. These nuts have been replaced with finger-friendly wing bolts. Kick-plate adjusts via the same method.
How to Use
- Best location is in the corner of a small pen, as this allows catching the animal with the least effort. Drop the top of the chair over the gate or fence at a 45 degree angle.
- Catch the sheep by the head. Back the sheep into the chair. As the back legs hit the bottom crossbar, the rump (and most of the animal's weight) will fall into the webbing. Take care not to catch the rear legs in the 2 vertical chair legs.
- Complete the process by lifting the head upwards into the sitting position.
With one hand, tip the chair forward with the sheep inside it. Allow the animal to fall out onto its feet. Hang onto the chair or you may be chasing the animal/chair combination around the pen.
Does not work well with horned animals. Their horns may become entangled with the webbing.
Note: Deck Chair Replacement Webbing (#807515) DOES NOT fit our Old Deck Chair (#807500).
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Jeffrey K from Tennessee
Easy replacement and makes the chair a bit more easier to use by prohibiting the sheep to sink too deep. As always, Premier 1 ships quickly and includes the necessary instructions for what ever product I purchase.
Patricia M from New Mexico
Use this product for helping trim my ewes feet. Use this with Premier 1's lawn chair. Makes it much easier to trim feet.
Erez T from Minnesota
This product was easy to install, but one of the holes was a 1/4" off. The pole was drilled at 7-3/4" apart and the other pole was 8" apart. These holes were to install the bolts for the acrylic foot panel. I had to re-drill the holes in the acrylic. The rest of the installation was VERY straightforward!
This chair is NOT recommended for rams or goats. The ewes have no problem in the chair, while the goats and the rams fight to get out.
This helped trimming their hooves tremendously!! Do have a second person to help as well as to comfort the animal while the hooves are trimmed. They are definitely anxious in this chair.
Charles M from Tennessee
We have been setting our sheep down on their butts to trim hooves even though we have a tilt table. The table works great but the stress on the sheep isn't worth the convenience to us. The deck chair works great as expected and was delivered earlier than promised.
Dennis D from Tennessee
Chair was easy to assemble well constructed. No tools needed!