30" Wire Panel – DIY Feeders for Goats & Sheep
30" x 48" welded wire feeder panel. Commonly used to build your own single-sided or double-sided hay feeders for goats and sheep. Hot-dip galvanized steel construction.
Can also be used as a trellis for climbing plants, or as a barrier to protect valuable trees from deer and livestock.
California Residents: Proposition 65 Information
Instructions/Diagrams:
Specs
- Panel dimensions: 30"W x 48"L
- 1/4" diameter steel rods
- Hole spacings: 3" x 5"
- Bag of (6) barbed 1.6" staples included
All Premier welded wire panels are hot-dip galvanized after all welds are completed. This ensures a heavy zinc coating that resists rusting and extends panel life for years.
How to Use
Tips
If your panels are not fitting…
If the feeder panels appear too long to fit correctly into your feeder, it may be that your feeder is not square or slightly less than eight feet long.To fix this problem you can overlap the panels in the center as shown in the photo.
Precautions
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Feeders and Troughs
Build Your Own Hay Feeders – Plan Booklet
Item #900000 -Full-color 12 page booklet for building your own hay-saving, sheep and goat feeders using Premier’s durable welded wire panels.
$3.00 -
Wire Panels and Accessories
24" x 48" Wire Panel – DIY Feeders for Large Sheep & Rams
Item #9660001 -24" x 48" welded wire panels to build your own feeders for large sheep and rams. Reduce wasted hay and save money.
$35.00 -
Fencing
Staples, 1.6" Barbed for High-Tensile Wire, per lb.
Item #360200 -Heavy-duty barbed staples for affixing tube insulators or non-electrified high-tensile (HT) wire to wood posts.
$3.50 -
Handling Equipment
Ground Rod and/or Connecting Pin, 3'
Item #151200 -Effectively ground energizers or firmly secure handling equipment. Galvanized pin is resilient to rust and wear.
$8.00 -
Wire Panels and Accessories
Eyebolt
Item #936100 -Plated steel bolt for holding connecting pins, tie gates shut and a multitude of farm uses.
$2.10 -
Wire Panels and Accessories
Wire Panel Hinge, 48" tall
Item #965401 -Provides a strong, reliable connection that is also a 360° hinge. Use to easily attach wire livestock panels and gates together.
$5.50 -
Handling Equipment
Snap Clip, Zinc Plated
Item #965405 -Use to connect wire panels and hang poultry waterers and feeders.
$2.00
Write a Review
You must be logged in to leave a review. Please sign in.
Thomas L from California
Very pleased with the quality and shopping experience! Thanks so much!
William H from Kentucky
We were so pleased with the first single sided feeder that we made a second.
Donna D from California
Panels were more than I expected them to be. They should hold up a good long time.
Doug C from Colorado
Shipment arrived just a couple of days after I placed the order. Built my 4th and 5th 8-foot goat feeder - using your excellent plans - and they work great. One slight concern: the goats all wind up with a rub mark on the bridge of their noses after using the feeders for a time. Wider vertical spacing of the openings (just a couple of inches) might eliminate this.
Phyllis S from Idaho
Perfect for the custom feeder I purchased for sheep. It now works great for the goats. Thank you!