Drive Caps for SmoothCote™ FiberRod
Use a drive caps to protect the top of the FiberRod from splintering when driving them in the ground.
Drive caps are compatible with these posts:
One drive cap lasts through years of uses and many posts. We recommend approximately one cap for every 20 posts ordered.
- 2" long
- Nylon plastic
- 20 per package, but sold individually
- Place the drive cap on top of FiberRod
- Drive into the ground with a rubber mallet or steel hammer
- Take the drive cap off of the FiberRod and continue with additional posts
We do not recommend leaving drive caps on the top of posts.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Brandon N from Kansas
Cap works great. Had my doubts but it works. Could be longer.
Tim M from North Dakota
My application needed these permanently affixed to the 3/8" rods. They work great!
Barbara S from Indiana
Very much needed, but buy more than one!
Joe K from Washington
Work great for driving my 1/2 inch fiberglass rods into the glacial til in my backyard. Takes hard blows with no problems using a hardened shot hammer.
Deborah R from Pennsylvania
Yes, this cap does really protect the tops of the fiberglass fence posts. You shouldn’t mistreat the tops of the post by pounding directly on them. I have had them stick on the post, but small thing compared to injuring the post permanently.