Fence Fault Finder
3 in 1 tester for fence voltage, intensity of current and fault finder.
Indicates which direction a fault (leak) in your fence is located.
Instructions/Diagrams:
Fault Finder Manual 
Specs
- Hard plastic body with LED display (2" x 1.5")
- 7" x 3" x 1"
- 9 volt battery included
Benefits
- Effective for locating direction of voltage flow on a fence line
- Lightweight
- Easy to read
- No ground probe
Precautions
Will not show direction of a fault within a roll of netting. It will indicate direction if used between two rolls of netting. Why? Netting ends twist all the conductors of the net. If used in the center, the device will not be able to indicate the direction of the leak because of these twists. It can be used to determine the net in which the fault is located.
When the unit reads "LL" or "low batt," the battery on the tester (not the energizer's battery) is low and needs to be replaced.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Electric Netting
PermaNet® 10/48/6 (150' x 48" white/black roll), single spike
Item #206620 -Designed to be left in one place for months or years, but still easy to move if needed. It's sturdier than other nets with regular posts.
$212.00 -
Conductors - Tape-Rope-Twine-Wire
EnduraSoft® 6.0, 660 ft roll
Item #256500 -For permanent electrified fences. Made of polyester so it’s soft to the touch. Very good conductivity (50Ω/1000 ft) so it’s suited for any length of fence line and nearly all energizers.
$93.50 -
Conductors - Tape-Rope-Twine-Wire
IntelliRope® PE 6.0, 660 ft. roll
Item #256900 -Rope fence for both permanent and portable situations because polyethylene filaments resist wear and abrasion. Use for horses, cattle, sheep and goats.
$57.00
Write a Review
You must be logged in to leave a review. Please sign in.
Jonathan H from Mississippi
I love these fence testers. They are a must have tool for electric fencing. Extremely durable and well made. I've seen them get soaked in pouring rain multiple times and continue to work after being dried out. Definitely worth the money. They are my favorite of several brands I've used!
seymour b from Oregon
This tester is head and shoulders above every other tester I have used. It's easy to use, easy to read, very reliable. It does not need a ground! Prior to this the only reliable fence tester we had was my wife (who for some reason doesn't mind getting zapped) - at last she's got a break!
Woody W from Catskills, New York
This thing is amazing. It pointed toward a fault where I knew there were too many weeds. I used a lot of Round-Up, and am eager to see what it says when they're dead and the bottom conductor runs clear. Forget the part of the instructions that says you have to insert the wire in the groove to find faults. I use rope conductors, which don't fit easily, and using the metal contact that sticks out the top works fine for detecting faults.
Elton M from Central Illinois
I lost the same fence tester I had in standing wheat so I went into the house within the hour and ordered another one. That is how good this tester(fault finder) is. I would not have electric fence and sheep without a tester like this one.
Amy C from Michigan
This tool has proven to be extremely helpful in pinpointing shorts in our electric fence. No longer do we have to walk every inch of fence in search of the source of the problem. We had considered getting this product years ago but didn't because of the price. It is worth the price! It is definately one of those prized time saving tools you're glad you have on the farm.
