- Hard plastic trough with galvanized steel grid
- Size: 38"L, 5"W, 4"D
- Grid spacings (ea) 5" x 6"
- Adds strength.
- Keeps young kids from lying in the feeder.
- Prevents boss goats and sheep from dominating while feeding.
- Goats can't push feed out the end with their noses.
See installation instructions above.
The 4" brackets are too wide for the spacings of our PowerBilt Panels (3"). They do fit our standard welded wire panels.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Kristin S from Missouri
I’m using these in a creep feeder situation for my Babydoll Southdown lambs. They hang perfectly on hog panels, and can be easily lifted off to clean out and rehang. Super easy to handle, heavy enough to stay in place, and they keep the lambs out of the feed. The design keeps the larger ones from pushing aside the others. Working perfectly!
Ann M from South Carolina
Very disappointed. Ordered six of these to hang on Premier Powerbuilt panels but the spacing of the hanging bracket does not align with the spacing on the Powerbuilt panels. Wish that had been made clear in the write up since it says they work on panels.
James F from South Carolina
Great feeder, but very expensive.
They're very useful for both sheep and goats, but you'll have to trim the bolt holding the grate down for it to fit on a 2x4. (Or replace it with a deck screw to semi-permanently attach it to the board.)
Tara S from Minnesotta
I like that the feed isn't getting pushed out onto the floor and the dividers keep the bigger lambs from pushing the little ones away from the feed.
George P from Oklahoma
I like the trough and the sheep can eat out of it fine. I did have to change the bolts (3) that came with the unit to to shorter ones. The longer bolts would not allow the feeder to fit over a 2 x 4. The feeder is designed to fit into a hog or cattle panel. I tried it in a panel, and it fits nicely--but that wasn't where I needed to put it.