High-Tensile Sleeves
Used to splice together or tie off high-tensile (HT) wire. Produces conductive joints that will take strain.
For 12.5 gauge wire. Barbed sleeve fits 16-12.5 gauge wire.
Specs
- High-Tensile sleeves: 100/box
- Hayes sleeves: 100/box
- Barbed sleeves: 50/box (1.60-2.50mm / 16-12.5 gauge)
Benefits
How to Use
- To make splices, use 2 sleeves
- Slide both sleeves onto one side of wire to be spliced through one side of sleeve holes.
- Thread second wire to be spliced through other side of holes in sleeves. Overlap wires so there is enough space on wires for both sleeves.
- Use a Crimping Tool to crimp the sleeves closed.
- Before terminating the HT wire, put sleeve in place on fence line.
- Bring end of HT wire around post, through an insulator if needed, and thread end of wire through remaining hole in sleeve.
- Use a Crimping Tool to crimp the sleeve closed.
High-Tensile Sleeves:
- To make splices in HT wire, use 3 sleeves
- Slide all 3 sleeves onto one side of wire to be spliced through one side of sleeve holes.
- Thread second wire to be spliced through other side of holes in sleeves. Overlap wires so there is enough space on wires for all 3 sleeves.
- Use a Crimping Tool to crimp the sleeves closed.
- Before terminating the HT wire, slide both sleeves into place on fence line.
- Bring the end of HT wire around post, through an insulator if needed, and thread end of wire through remaining hole in sleeves.
- Use a Crimping Tool to crimp the sleeves closed.
Barbed Sleeves:
- To make a splice, use 2 sleeves. Slide both sleeves onto one side of wire through one side of sleeve holes.
- Thread second wire to be spliced through remaining set of holes in sleeves. Overlap wires so there is enough space on wires for both sleeves.
- Use a Crimping Tool to crimp the sleeves closed.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
High-Tensile Accessories
4-Slot Crimping Tool
Item #401100 -For squeezing (correct word is swaging) HT sleeves onto 12.5 gauge HT wires.
$91.00