Premier Bucket Holder
- 5-1/4"L x 2-1/2"W
- 1" opening for hanging on 1" thick wood panels
- Hot-dip galvanized to extend life
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Eric D from Ohio
The bucket nipple feeder is great and works well. The holder is not effective when you have multiple lambs using it. I will spend the extra dollars for the more expensive one to complet the set up.
Thomas R from Iowa
Hadn’t tried this before. We’d always just tied the bucket to the fence. What an improvement. Just enough of a tilt to keep the milk above the suction line. The frozen soda bottle inside the milk bucket worked well, too.
William R from Ohio
I would not buy again, they are very cumbersome and do not work well.
CR B from Louisiana
Plenty sturdy, has a bit of sharp slag in spots, and just off-sized for Premier’s square bucket. It wasn’t designed for hanging from chain link, but I rigged it to work nicely from a spare piece of 1" flat bar metal in between the chain link slats and it’s hanging just fine and level as well. We’re using it to hold a Premier 1 square bucket with gravity feed chicken waterers.
Like another reviewer mentioned the spacing is off for Premier’s bucket handle, but ours is a touch too narrow. It works, and it’s plenty sturdy so I’ll make do, but I’d recommend Premier perhaps check the quality control vs their buckets to make sure it fits snugly for future customers.
Good for the price and kept me from having to take the time make up something myself. Great way to make up the few extra dollars to hit the free shipping mark.
Christy W from Louisiana
Must have if you are going to purchase the nipple bucket.