Rope Connector 1.0
- Stainless steel bolt
- 1 1/4" long
- 3/4" wide
- Plated steel
How to Use
- Loosen screw in the middle of connector.
- Slide ends of both ropes to be connected into connector, one on top and the other on the bottom.
- Re-tighten screw with a screwdriver.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Chris P from Colorado
Ok, but not as good as the split bolt copper connectors.
Wendy & Alan B from Maine
the best possible way to connect or mend rope fencing. Not the easiest thing to get set up, but once started, easy to tighten and it stays in place until you choose to loosen it!
Valerie T from North Carolina
Work great! I had a blonde moment to start, thinking I had to strip the wires away and couldn't get it to grip, but once I realized the entire piece of rope gets secured, all went well.
Tamara W from Illinois
Easy to use. I was able to put up fencing alone using these. Made sure to unscrew them first so they were ready to go as I was installing. Used with the Intellibraid 6.0. Thanks for a great product!
easy to use.