RopeLink 2.6 and 2.45
How to Use
- To work correctly, rope(s) must be overlapped the length of the RopeLink.
- Starting at either end of RopeLink, lay overlapped rope into the first curl.
- Hold link with thumb and finger; with other hand, wrap overlapped rope into the rest of curls.
- After there is tension on the rope, the RopeLink will not slip.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Carol M from New Mexico
Love these links! So easy to use and make the fence look clean and professional looking at all the splices.
Marilyn B from Oregon
Tying knots in twine or rope ends up in arcing, which eventually burns up the little wires so the fence isn't hot. These are SO easy to use, they don't wear out and they're big enough that you shouldn't lose them if you drop them in the dirt! What could be better than that?
Sherrill P from North Carolina
Been using this for horse fencing on 11 acres for four years. Working fine so far. Not advertised to be for permanent fencing, but I use it as such.
Mary S from Virginia
This is the best connector for electric rope fencing since sliced bread! I've used several types of connectors, but the spiral connector is the best! It can be used without any tools and for a person with less than average upper body strength it is easily workable. I recommend the rope link connector to all my friends.
John A from New York
these really work great.