T-Post Adapter & Ground Rod Mount
Product Details
Enables fence energizers to be mounted onto standard T-Posts or T ground rods.
Can be used with these energizers:
- Solar IntelliShock 30, and 100
- Solar IntelliShock 60, 120, 180 and PRS B50, I25, I50 (previously sold)
Specs
- 2-1/2"W x 8-1/2"H
- Plastic
How to Use
This adapter fits over a wide size-range of T-Posts (there is not a standard T-Post size). Fit will be tight or loose depending on the individual posts.
- If the mount has a loose-fit, use a hose clamp to tight the base of the clamp against the post.
- Or, drill a 3/8" hole into the base of the mount where it rests against the flat side of the post. Thread a nut onto a bolt and insert into the hole from the outside. Using a second nut, secure the bolt to the mount. Place mount onto T-Post and adjust the nuts and bolt to provide tension against the post.
-
Energizers
Solar IntelliShock® 30 Energizer
Item #113200 -Solar powered 0.30 joule energizer. IntelliShock electric fence chargers are able to reduce battery draw when the fence's voltage is high.
$243.00 -
Fence Connectors and Accessories
T Ground Rod, 3' x 1/2"
Item #151210 -Provide a conductive ground circuit for your electric fence. Conductive t-grip is easy to install and remove.
$20.00 -
Fence Connectors and Accessories
T Ground Rod, 18" x 1/2"
Item #151220 -Provide a conductive ground circuit for your electric fence. Conductive t-grip is easy to install and remove.
$10.00 -
Handling Equipment
Galvanized Steel T Post, 6 ft
Item #327600 -Thick galvanized coating protects posts from the elements. Excellent supports for portable, permanent and high-tensile fence systems.
$24.50 -
Handling Equipment
Galvanized Steel T Post, 7 ft
Item #327800 -Thick galvanized coating protects posts from the elements. Excellent supports for portable, permanent and high-tensile fence systems.
$25.50
Write a Review
You must be logged in to leave a review. Please sign in.
Jerimy J from Georgia
The adaptor fits very lose on the T-post and kind of just flops around. It will hold the unit up on the post but I expected a tight fit. The unit leans back on the post due to the play in the adaptor. Had to hose clamp it so I didn’t worry about it falling off.
Joe M from Texas
This probably works best on a T-post. I got it to go on the T-handle grounding rod, but the rod is too small for this cap and it allows the solar charger to move around way too much. I suspect in a heavy wind it’ll fall off.
Gail Y from Ohio
This device is anything but a T-post adapter. You will need a plumbing pipe to fit it, and then you can attach the plumbing pipe to a U-post. Make sure to tie the unit to a fence post for stability.
Billy P from Michigan
Doesn’t fit a T-post. Must use zip ties to make it work. Every time you move fence must replace zip ties.
Anne B from Pennsylvania
Too wobbly for our T-post, but good on the ground. The energizer seems too heavy and liable to fall from the T-post because I didn’t have a hood fit, but I like the little bit of extra height off the ground.
