Square Buckets with Drilled Holes
We'll predrill our square buckets with the holes for our bucket teat units and spiral poultry feeders.
Before completing your order…
- Order accessories that go along with the drilled buckets under "Accessories Tab" below—bucket teat units, nipples, etc.
- EzeLid for bucket sold separately. Order below.
- Specify the number of holes and location (see second photo at right) per bucket at checkout by using the letters in the customization box.
Hole for the Spiral Feeder will be in the bottom center of the bucket.
Specify location and number of holes per bucket at checkout in customization box.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Trevon O from Missouri
These buckets are awesome! FYI, the natural latex nipples will need to be inserted onto the plastic base and then screw on the plastic unit onto the nipple (some went on easy and some needed finagled a little to get screwed on the whole way). I’ll be ordering the 4 gal bucket on my next order. I use the 2 gal with natural latex nipples to feed 20 babies and it’s done in less than 5 minutes. I take the bucket out after feeding so they don’t chew on nipples. Definitely get the lid. When tightening or loosening the teat unit, make sure you don’t under or over tighten them because the bucket plastic can ‘wave’ slightly causing it to leak at the O ring.
I may try cold milk feeding once my second bucket gets here.
Joe K from Pennsylvania
Ordered a bucket with holes for 4 teats. Installed all of them and 3 out of the 4 teats leak around the seal. In the directions they state that a 2nd sealing ring may be required if it leaks.
So why does a customer have to buy more seals just because it wasn’t designed properly. Now I have to buy 3 more seals and pay a ridiculously high shipping charge for parts that shouldn’t be needed in the first place.
Callene R from Kansas
As much as it emotionally pained me to purchase a bucket when I have them lying around, the absolute ease of having the exact pre-drilled holes that fit the exact teat units and being able to assemble the whole thing in 5 minutes was priceless! No leaks, no cursing, easy peasy. The kids took to the teats immediately. The only thing I’m disappointed in is that I didn’t try this system sooner.
Diana S from California
This is my 4th year using this bucket, and it continues to work GREAT. I bought it pre-drilled and use the red nipples and the hanger. Both kids and bummer lambs adapt readily and for all this time it has continued to hold up to all the banging and chaos. I’ve had a couple of nipples chewed a bit and have had to replace them, but aside from that this is a wonderful, durable feeding bucket that you will be very happy with.
Kelly G from Kansas
This was a absolute life saver when we had four lambs to bottle feed! I also had ordered expedited shipping but Premier called and said to not pay for the FedEx because USPS was just as quick now to our area! We still had it in two days. :) We also purchased the mount which worked very well!