Big Bale Feeder
Product Details
Select project image 2
Select project image 3
Select project image 4
Select project image 5
Select project image 6
Select project image 7
Select project image 8
Select project image 9
Select project image 10
Select project image 11
Select project image 12
Select project image 13
Select project image 14
Select project image 15
Select project image 16
Feed round or square bales efficiently while minimizing wasted hay. Premier’s Big Bale Feeder is reinforced above and below the feeding holes for added support against large, pushy rams or ewes.
Key benefits:
- Reduces hay waste and helps lower overall feed costs
- Heavy-duty wire panels designed for daily livestock pressure
- 3/8" reinforcement rods above and below feeding holes for added strength
- Modular panel system allows future expansion or reconfiguration
Now available as a Complete 6-Panel Kit for fast, hassle-free setup. Panels, hinges and snap clips are also available individually for custom layouts or replacements. See the “Customization” section for details.
NOT for use with cattle, horses or horned animals.
California Residents: Proposition 65 Information
Instructions/Diagrams:
Specs
6-Panel Kit includes:
- (6) Heavy-duty feeder panels
- (5) Connecting hinges
- (2) Zinc-plated snap clips
Wire Panel specifications:
- Hot-dip galvanized steel construction
- 48" tall × 40" long (per panel)
- Four 8" × 12" eating holes per panel with 1/4" reinforcement rods top and bottom
- 3/8" diameter support rods (outer rods and four vertical internal rods)
- 1/4" diameter rods throughout remaining structure
Shipping
Estimated Shipping Cost for Big Bale Feeder, 6-Panel Kit
Benefits
Big Bale Feeder—10% wastage, $297 wasted hay.
Other feeders—25% wastage, $750 wasted hay.
The $453 difference pays for a Premier Big Bale Feeder feeder—in only 1 year!
- Reinforced, double rod eating holes for pushy rams and ewes
- Folds flat—easy to store and move
- Adult sheep can’t get inside it
- More durable than feeders made with cheap farmstore wire panels
- Adapts to most round or square bale sizes
- Ships FREE via Ground service when ordering more than one panel. Most need 5–7 panels.
Shepherd’s Choice™ Management Tip
Due to weather variability during the haying season, producers may be feeding poorer quality hay during the winter months. As a result, late gestation and lactating ewes will need more protein in the grain mix. One can use soybean, dry distillers grains or corn gluten feed. The hay may also have less energy per pound—grain feeding levels may need to be increased by a half- to full-pound per day. Lastly, if your hay is mostly grass, consider feeding at least 1% limestone in the grain mix to improve calcium levels.Looking for ration advice? We can help customize a feed ration for your situation.
Customization
How many panels, hinges and clips are needed for a round bale?
- 4 ft dia. bale:
- 5 panels, 4 connector hinges, 2 snap clips
- 5 ft dia. bale:
- 6 panels, 5 connector hinges, 2 snap clips
- 6 ft dia. bale:
- 7 panels, 6 connector hinges, 2 snap clips
How To Use
1. Panels are easy to carry and store
2. Joining panels with wire hinges
3. Adding a large round bale
4. Wrap panels around bale and close with snap clips
Tip: To eliminate risk of sheep tipping over an empty feeder and thereby injuring themselves, drive a single steel post into the ground and secure 1 corner of the bale feeder to it. The post can stay in place all winter. Having noted that we rarely do this. We simply allow the sheep to tip the feeder over. Our last injury was 4 years ago—and we use 20 feeders all winter long.
Precautions
What NOT to do with Big Bale Feeders:
- Don’t use them for cattle or horses.
- Don’t use them with horned sheep or goats. We have tried this and know that they may get their heads caught and die.
- Don’t place bales on their curved (rolling) side. Bales may mushroom and collapse upon a feeding ewe.
- Don’t lift the feeder with the tractor loader. This puts unnecessary stress on the welds.
- Don’t let panels freeze to the ground.
- Don’t feed more than 40-50 ewes per feeder. Too many ewes per feeder may cause them to fight for access—which can result in poor-doing (or even dead) sheep.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Wire Panels and Accessories
Wire Panel Hinge, 48" tall
Item #965401 -Provides a strong, reliable connection that is also a 360° hinge. Use to easily attach wire livestock panels and gates together.
$6.25 -
Feeders and Troughs
Zinc-Plated Snap Clip, each
Item #965405 -Heavy-duty snap clip for hanging or securing feeders, buckets, gates and panels around the farm. Available in zinc-plated or stainless steel.
$2.25 -
Buckets and Troughs
Stainless Steel Snap Clip, each
Item #965406 -Heavy-duty snap clip for hanging or securing feeders, buckets, gates and panels around the farm. Available in zinc-plated or stainless steel.
$16.00 -
Supplies
PortaTrough™ 3
Item #938010 -Easy to clean 3 ft livestock feeders used to provide grain, minerals, salt or water. Stackable for easy movement and storage.
$56.00 -
Feeders and Accessories
PortaTrough™ 5
Item #938000 -Portable 5 ft feeder withstands all weather and animal conditions. Stackable for easy movement and storage.
$98.00 -
Enrichment and Sensory
Livestock Scratching Brush (red/blue), large
Item #293100 -Stiff bristled scratching post for sheep, goats, horses and cattle. Helps animals stay clean and removes irritants, like parasites.
$53.75 -
Tools, Instruments and Supplies
Livestock Scratching Brush (green/tan), XL
Item #293120 -Stiff bristled scratching post for sheep, goats, horses and cattle. Helps animals stay clean and removes irritants, like parasites.
$67.50
Write a Review
You must be logged in to leave a review. Please sign in.
Lora C from Massachusetts
I wish I had this 10 years ago. It has made my morning chores so much better.
I have 30 dairy and fiber goats and a full time job that occasionally requires me to travel and the ONE thing I can’t hire a house sitter to do is throw hay bales. Walk the dogs, feed cats and chickens, no problem — throw 45 pound hay bales is the deal breaker.
I can load this thing up and it’s good for a solid week. I put a tarp over the top to keep the hay dry and then the house sitter just runs the hose for the water bins and feeds them treats, everything is so much easier. Plus I can schedule my hay refills for a day when I have time to move several bales and if I am sick for a couple of days or something it’s no big deal.
Elaina K from North Carolina
Big bale feeder panels hold up well for years, work especially well with spiral hinges (also from Premier 1). Not a great option for horned animals, but Premier specifically warns about the risks. Cuts way down on hay waste.
Joel C from Washington
Very sturdy construction. Much stronger than I expected. Excellent quality hot dip galvanizing. It is being used for a large flock of sheep. I have three in use now.
Pamela K from Montana
This is the best money I’ve spent! I’m feeding 3x4 bales and it has saved me the work and waste. I like the larger spiral hinges. I have the old jug pens and the hinge was a smaller spiral.
I’m feeding goats, sheep, and alpaca.
The only thing I can think that would improve this setup would be some kind of easy-to-handle top. Some of my goats can jump up and into the middle.
Wellington M from Missouri
I am very cheap and these panels seemed expensive to me... at first, so I only bought one. I used it in the corner of the fence to feed square bales. It was amazing! So I bought a few more... and a few more... Now I have them in the corner of each barn stall and two full sets to use around round bales. The first ones I bought are still in perfect condition years later, because they are made TOUGH. Hay is expensive. These panels have EASILY paid for themselves by preventing wasted hay. I put a round bale in and cover the top with a small tarp. When the bale is done there is not a drop left wasted.

