Clipper Head Only
Change a shearing machine into a clipper in minutes! Requires only one screwdriver and just 3 minutes to switch from a shear head to a clipper head.
Interchangeable clipper head fits onto same motor as our 4000s shearing machine.
- Slick shearing show sheep
- Shaving or peeling beef and dairy cattle
- Clipping meat goats, dairy goats, horses, show pigs, ranch dogs, llamas and alpacas
- They've also been used to cut imitation turf!
Instructions/Diagrams:
Specs
- Sleek, low-profile ribs makes it easier to grip the tension knob.
- Shorter tension bolt equals fewer turns needed to reset tension, so you spend less time changing and tensioning blades.
- Internal roller bearings instead of sleeve bushings create less heat so they last longer.
- Stainless steel inserts that are riveted in reduce the possibility of the inserts becoming loose.
- Round steel drive in place of a plastic bushing makes fitting the top blade easier.
- Requires 2 screws for attaching to motor. Sold separately.
- Requires a screwdriver and about 3 minutes to change heads.
- Will drive Premier and Lister clipper blades.
Installation
Precautions
Failure to oil as often as recommended may lead to excess heat and premature wear and tear.
Warning: Unlike some other clipper motors, this motor will neither slow down nor sound different when oil is needed. But failure to oil will quickly cause damage to the blades and drive head. So you MUST apply oil by time instead of sound.
Apply a small amount of oil every 3 minutes to the tips of the teeth and each side of the blade by dipping them into a dish of oil or pouring oil directly onto the teeth with a small oil container and every 10 minutes drip oil into the small hole behind the tension knob assembly. Excessive wear can occur if not oiled properly!
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Professional Shears
#10 White Clipping Oil, 8 oz bottle
Item #258300 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$4.20 -
Clipping and Shearing Machines
Premier 4000 Clipper/Shearing Motor Only
Item #828007 -Drives either Premier's shear head or clipping head. Powerful permanent magnet motor with high torque.
$218.00 -
Accessories
Clipper Machine Sleeve
Item #824608 -Genuine leather sleeve to care for and enclose your Premier 4000c clipper machine.
$16.00 -
Clipper Blades - Large
Premier Coarse Clipping Blade Set
Item #871000 -Remove fiber, hair and wool from livestock with easy. Fits large clipping machines. Can be resharpened.
$43.00 -
Clipper Blades - Large
Premier Fine Clipping Blade Set
Item #873000 -For trimming hair, wool and fiber on show animals. Cutting depth of .06".
$43.00 -
Clipper Blades - Large
Premier Medium Clipping Blade Set
Item #872000 -For removing hair, wool and fiber from livestock. 0.08" cutting depth.
$43.00 -
Clipper Blades - Large
Premier Super Surgical Clipping Blade Set
Item #873600 -Removes hair and fiber very close to the skin. Cutting depth of 0.02".
$57.00 -
Clipper Blades - Large
Premier Surgical Clipping Blade Set
Item #873500 -Large blades for clipping machines. Cutting depth of 0.04". Pre-sharpened by Premier.
$43.00 -
Clipper Blades - Large
XtraCover Clipping Blade Set
Item #875000 -Clipping blade set that has a cutting depth of 0.25". The added cover protects livestock form sun and the elements.
$45.00 -
Clipper Blades - Large
Replacement Top Blade
Item #873700 -Replacement top blade for the Super Surgical, Surgical, Fine, Medium and Coarse blades sets. 17 teeth.
$17.50 -
Clipper Blades - Large
Replacement XtraCover Top Blade
Item #875100 -Used as a replacement top blade for the XtraCover clip set only. 22 teeth.
$17.50 -
Accessories
Comb Screwdriver
Item #824600 -For securing combs to shearing machines. Provides more leverage than a normal screwdriver and fits comb screws on all major shearing units.
$3.00
-
Accessories
Tension Nut - 01
Item #82800401 -Replacement Parts Only for the Premier 4000c clipper head.
$1.20 -
Accessories
Tension Spring - 02
Item #82800402 -Replacement Parts Only for the Premier 4000c clipper head.
$1.20 -
Accessories
Upper Blade Guide - 03
Item #82800405 -Replacement Parts Only for the Premier 4000c clipper head.
$1.20 -
Accessories
Tension Bolt - 04
Item #82800406 -Replacement Parts Only for the Premier 4000c clipper head.
$2.30 -
Accessories
Blade Positioner - 05
Item #82800407 -Replacement Parts Only for the Premier 4000c clipper head.
$1.20 -
Accessories
Crank Spindle Cover Kit (crank spindle, tension lock spring & excenter head) - 07
Item #82800409 -Replacement Parts Only for the Premier 4000c clipper head.
$4.25 -
Accessories
Small Bearing - 08
Item #82800411 -Replacement Parts Only for the Premier 4000c clipper head.
$5.90 -
Accessories
Large Bearing - 09
Item #82800412 -Replacement Parts Only for the Premier 4000c clipper head.
$2.50 -
Accessories
Crank Spindle with fibergear - 10
Item #82800414 -Replacement Parts Only for the Premier 4000c clipper head.
$7.47
Write a Review
You must be logged in to leave a review. Please sign in.
Laura S from Ohio
This is fantastic! I was so pleased to learn I could use the same body from the shearer and change the head to make it a clipper. Now I can use the same machine for shearing, show clipping the sheep and clipping horses! Premier products are the best!
Roger B from Pennsylvania
Works Great and interchangeable with my other head.
Linda K from Michigan
I bought this to replace my old clipper head that no longer worked right. Since putting the new head on the motor I'm back to clipping show lambs with my favorite set of clippers!
Mary D from Kansas
Looking back on it, I should have bought the clipper head first instead of the shearing head. It is fantastic. I use it to shear my colored angora goats, and it is lightweight, easy to handle and best of all, cuts through the mohair like butter without nicking my goats, as the shearing head can.
I use the medium clipper blade set, and I love them.