- Galvanized steel pipe with elastic webbing.
- Can support large, adult sheep and goats (without horns).
- Adjustable width for all sizes.
- Included support rope for large/heavy sheep. (Prevents elastic webbing from over-stretching.)
- Length is 40 inches.
- Maximum width is 16 inches.
- Minimum width is 10 inches.
- Bottom "legs" are 14 inches.
- Replacement webbing is available.
- Can be folded flat for easy storage and transporting with some disassembly.
We've introduced several improvements over the previous version:
1.) New elastic webbing
- A thick weave of elastic shock cord has replaced the string net we used previously. The elastic web springs back into place when the ewe leaves the chair reducing the risk of entanglement. The webbing quickly hooks over built-in rivets for easy replacement. Included support rope can be used for heavy animals to prevent over-stretching.
- This simple device prevents the animal’s hind legs from getting caught in the mesh. On occasion we’ve had to chase down a ewe that’s made off with our deck chair because of this very reason—not often, but it has happened.
3.) Quickly make size adjustments
- When using our original chair, a wrench was needed to make side-to-side adjustments. These nuts have been replaced with finger-friendly wing bolts. Kick-plate adjusts via the same method.
How to Use
- Best location is in the corner of a small pen, as this allows catching the animal with the least effort. Drop the top of the chair over the gate or fence at a 45 degree angle.
- Catch the sheep by the head. Back the sheep into the chair. As the back legs hit the bottom crossbar, the rump (and most of the animal's weight) will fall into the webbing. Take care not to catch the rear legs in the 2 vertical chair legs.
- Complete the process by lifting the head upwards into the sitting position.
With one hand, tip the chair forward with the sheep inside it. Allow the animal to fall out onto its feet. Hang onto the chair or you may be chasing the animal/chair combination around the pen.
Does not work well with horned animals. Their horns may become entangled with the webbing.
Note: New Deck Chair Replacement Webbing (#807515) DOES NOT fit our Old Deck Chair (#807500).
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Traci B from Indiana
I wasn't sure this would work, but our girls are so big and hoof trimming is a killer for us, so I ordered it. Best $100 ive spent lately!! Some previous reviews said there were no instructions on assembly with it, so Premier must've taken this into consideration because instructions were easy to read and assemble. It is so comfortable that I think I'll be sleeping in it during lambing season instead of on straw bales!!
Patti from Missouri
Works great. Most of my goats were disbuded, but I have three older girls that had not been. The only difference, I have to check horn placement before I tip them out. I hold the horns as I tip them out so there's no chance of being trapped and hurt. That isn't a problem caused by the chair. I have no complaints at all, and no regrets making this purchase. It save my back a lot of pain. So, thank you. A very happy customer.
Misty H from Kentucky
This helps me wrangle my sheep even when I'm by myself, and these are big sheep. Hoof trims and medicine are much much easier now. The only problem is sometimes a sheep is more resistant to the calming effect and will get tangled in the netting. It's not too hard to get her back out, though.
Dot M from Pennsylvania
I love this chair! No more back ache after trimming hooves. It worked very well for me. I can actually do the work alone now that I have a comfortable seat for my sheep.
Julie S from Iowa
We had the netting fraying already after 10 sheep weighing no more than 160 pounds in it. I called in to customer service and sent pictures of the fraying and we should be getting a new netting free I would hope. The chair made the hooves much more accessible. However, we did have ewes attempt to turn to the side and got their hooves caught in the netting. Our main complaint was that the chair was shipped with no assembly directions. We had to look at pictures in the catalog and online to assemble it and try and figure out how to use the support cords. I even called Premier and asked instructions for the support cords and she promptly emailed instructions. Why not include this with the chair in the box?! It does help but you have to figure it out and it works best to have 2 of you one trimming and one holding the head down so they don't flip over on side.