24" Wire Panel – DIY Feeders for Large Sheep & Rams
24" x 48" welded wire panels to build your own hay feeders for large sheep and rams. Refer to Premier’s Build Your Own Feeder Plan Booklet for more information.
Also useful as a trellis for climbing plants, or as a barrier to protect valuable trees from deer.
California Residents: Proposition 65 Information
Instructions/Diagrams:
Common Uses
Specs
- Panel dimensions: 24"W x 48"L
- 1/4" diameter steel rods
- Hole spacings: 4" x 6"
- (6) barbed 1.6" staples included
All Premier welded wire panels are hot-dip galvanized after all welds are completed. This ensures a heavy zinc coating that resists rusting and extends panel life for years.
How to Use
Tips
If your panels are not fitting…
If the feeder panels appear too long to fit correctly into your feeder, it may be that your feeder is not square or slightly less than eight feet long.To fix this problem you can overlap the panels in the center as shown in the photo.
Precautions
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Feeders and Troughs
Build Your Own Hay Feeders – Plan Booklet
Item #900000 -Full-color 12 page booklet for building your own hay-saving, sheep and goat feeders using Premier’s durable welded wire panels.
$3.00 -
Wire Panels and Accessories
30" x 48" Wire Panel – DIY Feeders for Goats & Sheep
Item #9661001 -30" x 48" welded wire steel panels for building your own sheep and goat hay feeders. Saves money by reducing hay waste.
$42.00 -
Fencing
Staples, 1.6" Barbed for High-Tensile Wire, per lb.
Item #360200 -Heavy-duty barbed staples for affixing tube insulators or non-electrified high-tensile (HT) wire to wood posts.
$3.50 -
Handling Equipment
Ground Rod and/or Connecting Pin, 3'
Item #151200 -Effectively ground energizers or firmly secure handling equipment. Galvanized pin is resilient to rust and wear.
$8.00 -
Wire Panels and Accessories
Eyebolt
Item #936100 -Plated steel bolt for holding connecting pins, tie gates shut and a multitude of farm uses.
$2.10 -
Wire Panels and Accessories
Wire Panel Hinge, 48" tall
Item #965401 -Provides a strong, reliable connection that is also a 360° hinge. Use to easily attach wire livestock panels and gates together.
$5.50 -
Handling Equipment
Snap Clip, Zinc Plated
Item #965405 -Use to connect wire panels and hang poultry waterers and feeders.
$2.00
Write a Review
You must be logged in to leave a review. Please sign in.
Gary F from New York
Quality of these panels is much less than they used to be with respect to the welding. One of the welds on a panel I just received had failed. Quality control on the panel welding is deficient. I have never received one with a failed weld and have been using these panels to build feeders for over 20 years.
Richard H from Connecticut
I made “A” frames over large pots inside the greenhouse of climbing vegetables. The panels are very strong and should support my winter squash and cucumber plants.
Gary F from New York
One panel recently purchased was obviously slightly bent when welded and therefor was difficult to place in the feeder. Also several of the horizontal rods extended beyond the vertical rods. Other than those defects the panels work, but quality does not seem to be as good as it was when I first ordered the same panels years ago. I have built 16 feeders using the Premier 1 panels and DIY feeder plans. The originals built twenty plus years ago are still in use and the original panels have held up well.
Laurie J from Colorado
5 stars all the way! I have wanted to build a feeder for years. I finally did it! It was pretty easy and well worth it it. My sheep love it and it has cut my hay loss by at least 3/4.
Michelle K from Pennsylvania
Panels worked great for the feeders we built following the Premier 1 plans!