Drive Caps for SmoothCote™ FiberRod
Use a drive caps to protect the top of the FiberRod from splintering when driving them in the ground.
Drive caps are compatible with these posts:
One drive cap lasts through years of uses and many posts. We recommend approximately one cap for every 20 posts ordered.
- 2" long
- Nylon plastic
- 20 per package, but sold individually
- Place the drive cap on top of FiberRod
- Drive into the ground with a rubber mallet or steel hammer
- Take the drive cap off of the FiberRod and continue with additional posts
We do not recommend leaving drive caps on the top of posts.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Krystal B from Oregon
The caps work great. I bought a few extra because the guys tend to loose them or leave them in pockets. I highly recommend grabbing some to drive your fiberglass rods into the ground…even if you have soft ground. This protects the rods and keeps them from splintering or shattering. I like the look of them on top of the posts…so I’m going to be ordering extra and just permanently affixing them to each one.
Brandon N from Kansas
Cap works great. Had my doubts but it works. Could be longer.
Tim M from North Dakota
My application needed these permanently affixed to the 3/8" rods. They work great!
Barbara S from Indiana
Very much needed, but buy more than one!
Joe K from Washington
Work great for driving my 1/2 inch fiberglass rods into the glacial til in my backyard. Takes hard blows with no problems using a hardened shot hammer.