Drive Caps for SmoothCote™ FiberRod
Use a drive caps to protect the top of the FiberRod from splintering when driving them in the ground.
Drive caps are compatible with these posts:
One drive cap lasts through years of uses and many posts. We recommend approximately one cap for every 20 posts ordered.
- 2" long
- Nylon plastic
- 20 per package, but sold individually
- Place the drive cap on top of FiberRod
- Drive into the ground with a rubber mallet or steel hammer
- Take the drive cap off of the FiberRod and continue with additional posts
We do not recommend leaving drive caps on the top of posts.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Tom S from Massachusetts
Very handy. Preference for high visibility color instead of black which could be spotted in the field. I taped mine to be able to more easily spot.
Joy D from Ohio
Excellent for driving the temporary posts into the ground. However, I purchased one for each post but learned they did not fit the 11/16" posts snuggly so I really only needed one or two to accomplish the task at hand.
Tyler F from California
These have worked great for preserving my fiberglass posts. My only gripe is sometimes they get stuck on the post after you’re done hammering. So far I’ve been able to just give them a twist and they come loose but I have spares in case one gets stuck on there for good. Still, a must have if you’re using fiberglass temporary posts.
Steven C from Michigan
Purchased the 3/8" drive caps. Have not used yet, but they look durable enough to hold up for quite a bit of re-use.