New! 48" ElectroFence Gates allow for quick access in or out of the paddock. Simply lift the handle, remove the post from the dock and go on through. For a shorter gate, look to 35" ElectroNet gates.
This a complete gate that can be added to the ends of existing nets (or between permanent fences) and electrified. Gate post locks in place via a handle and docking station. Stainless steel clips at each end of the gate provide electrical connections to netting. Gate's drivable posts can be used in hard soils.
Same mesh spacings as ElectroFence but with tighter verticals, 6" instead of 12".
Available as a 7.5 ft walk-through or a 21.5 ft for vehicles and whole flocks.
- 48" tall installed.
- 11 horizontals (10 conductive).
- Horizontals are white/black or green/black.
- Horizontal spacings from bottom to top are: 4", 4", 4", 4", 4", 4", 6", 6", 6", 6".
- Verticals are white plastic struts placed every 6".
- 7.5 ft and 21.5 ft length options.
- Contains gate, posts, handle & docking station.
- Drivable posts are .75" PVC with a metal spike that goes into the ground.
- 21.5 ft gate contains a center post.
Two more conductive strands than ElectroNet Gates—better for semi-permanent and perimeter fences, or for fences with high predator pressure.
Drivable posts—can be inserted into hard soils with the help of a mallet or dead blow hammer.
If the gate is to be used in the middle of a fence line, and power needs to be carried across, simply use a PowerLink to carry the power over to the continuing section of fence.
Use only with a low or wide impedance intermittent pulse energizer. Warning! Do NOT use continuous output energizers with electric netting due to risk of fire. (Fi-Shock™ brand energizers which are sold as low impedance, continuous current output should NOT be used with electric netting.) All energizers sold on Premier's website use an intermittent pulse and are suitable for use with electric netting.
Dry conditions and wintertime usage may reduce the effectiveness of electric fencing.
Dry or frozen ground many cause the NetPost spikes to bend or break if inserted with force. Pilot holes may be needed.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.