- Eliminates need for separate hay/grain feeders
- Heavy duty construction
- Feeds both grain and hay
- Height: 20"
- Top of feeder: 16.5"W, 11"D
- Bottom of feeder: 13"W, 5.5"D
- Inverted 4" L-Hooks enable feeder to hang on panels and boards up to 2"
- Rods: 7/16" vertical rods and 1/4" horizontal rods
- Hot-dip galvanized
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Kerry O from Texas
Very well made and high quality. Hooked easily onto chain link dog kennel wall for use in creep feed area.
Todd S from New York
Well constructed and the fact that it was one piece is excellent. The only reason I gave it a 4 out of 5 was because, like all my other feeders, I had to zip tie a flip top lid on it so the goats wouldn't pull all of the hay from the open top.
Philip L from Wyoming
Constructed well. Too small for our application, Burros. Too small for single flake of hay. Now I have to pay to return it.
Mark B from Texas
This is a very nice feeder. Both hay and feed work equally well in it. It would have been nice to have drain holes factory drilled into it, but a few minutes with my drill and my problem solved. Some my not want the holes in theirs, so I guess that is a personal preference.
Andrea P from New Mexico
Feeding single rams with this feeder. Needs to have a bigger pan for feeding grain. Bars could be wider and set out farther to the front. Big rams can pull feed from the top. It only holds 1 small block of hay. Built well and appears to be holding up to abuse that rams dish out. This was the main reason for purchase.