Gripples
Great for splicing woven wire, smooth high-tensile steel wire and barbed wire.
- High load holding
- Corrosion resistant
- Join and tension in one
- Saves time and money in labor
- Faster than tying and knotting wires
- Adjustable and can be re-tensioned year-after-year
Specs
- Medium, 1-3/4"L x 1"W x 1/2"H (10 to 14 gauge)
- Barbed, 1-3/4"L x 1-1/4"W x 1/2"H (12.5 gauge)
- 200 per container, but sold individually
How to Use
- Insert one wire into each end of Gripple. (The wire goes into large hole and comes out the blue hole at other end.)
- To tighten, for best results use Gripple Tensioning Tool and follow instructions with tool.
- To change or remove Gripple, release the holding mechanism by inserting a small nail into tiny hole above large hole.
- Cut the wire close to the barb so that you have at least a 2" tail of wire to push into the Gripple.
- Insert both twisted wires of one side of the splice into the large hole of the Gripple until the wire comes out of the other end.
- Insert the other portion to be spliced into the opposite end of the gripple until the wire comes out the other end.
- Stretch the wire to the desired strain.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
High-Tensile Accessories
Gripple Torq Tensioning Tool
Item #336830 -Tensions wire using a Gripple (10 gauge, 12 gauge and barbed) without the need of an inline strainer or handle.
$75.00 -
High-Tensile Accessories
Wire Dispenser for High-Tensile Wire
Item #402000 -Galvanized steel. Dispenses high tensile wire unattended. Does not over-travel.
$148.00 -
High-Tensile Accessories
Knipex High-Tensile Wire Cutters
Item #406002 -While clippers for 12.5 gauge and other high tensile fence wires. Works well for soft wire too.
$65.00 -
High-Tensile Accessories
Multi-purpose Fence Tool
Item #408301 -Hammer, hold staples, remove staples, grip or cut wire, an essential tool in every fence builder's kit.
$10.20 -
High-Tensile Accessories
XT1 Ratchet Strainer, each
Item #330200 -Permanent electric fence strainer for adding tension or splicing strands of high-tensile fencing wire. Made by Strainrite in New Zealand.
$3.50 -
High-Tensile Accessories
RX2 Contractor Chain Strainer
Item #408309 -Tensions high-tensile electric fence wire for splicing. A proven design used by professional contractors for building livestock fences.
$131.00
Write a Review
You must be logged in to leave a review. Please sign in.
Grant N from Minnesota
Never used these before but they made fencing much easier and quicker. I didn't purchase the gripple tool but I would next time, esxpecially for corner terminations. Very goodproduct.
John B from Texas
Prompt delivery. Gripples work fine.
Marianna S from Indiana
My Bayco fence is 24 years old and is needing spliced in a few places these are great for doing that simple to use and hold well they bring the fence line together nicely. Love them!!!
Rodney D from Mississippi
Using them to terminate hi tensile wire around end posts. Works great but can be a little tricky to get attached once you loop around the post; keep some extra slack. Good price and works great.
Danielle B
The gripples were reasonably priced and new (not refurbished). The gripples are perfect for my type of fenc. My order came quickly. The shipping cost of almost $15.00 for a $10.00 order for 4 small items seemed high, though.
