Heat Lamp Stand
For hanging our Prima Heat Lamp above poultry brooders. Adjustable height allows user to control the surface temperature of the brooder floor.
- Lamp hanging system
- Easy to assemble
- Large 28" x 28" footprint
- Erected: 28"W x 42"H
- Disassembled/Collapsed: 6"L, 6"W, 42"H
- Chain: 26" for adjusting preferred height
Adjustable height allows user to control the surface temperature of the brooder floor.
Hanging system includes:
- Strong, one-piece legs, no weak middle. (The previous design with 2-piece legs wasn't stable enough, in our view.)
- Metal heat lamp holder.
- Large chain (to adjust height, attach links to holder).
- Heat lamp clip (securely holds lamp to chain). Note: If you need a replacement, see "Replacement" tab above.
2021 update: Legs braces are now held-in place with machine screws and nuts (no self tapping screws) to firmly hold braces in place. The result is a stiffer, stronger heat lamp stand that easily disassembles with no wear to the legs.
For models that shipped with self tapping screws—only use a manual phillips screwdriver to attach the leg screws. Do not use a screw gun or powered drill. Manual use allows users to “feel” the tension and stop. Powered tools do not allow for this, causing users to strip the plastic holding the screws. Our installation video shows the use of a screw-gun, the tension is set to "1" and the installer is familiar with the sensitivities of plastic legs and metal screws.
Heat Lamp and AccessoriesItem #557030 -
Smooth glass (PAR) infrared bulbs that can be used in heat lamps.$13.00
Heat Lamp and AccessoriesItem #557033 -
Smooth glass (PAR) infrared bulbs that can be used in heat lamps.$17.00
Write a Review
You must be logged in to leave a review. Please sign in.
Gail G from New Hampshire
Needs larger screws as they can fall out.
Joan T from Virginia
I love the brooder light. The light stand not so much. The screws only hold the bar to the legs for a small amount of time and then they strip out the hole in the plastic legs rendering the stand useless. A lot of money for something that doesn't even last one hatching season.
Victoria A from New Jersey
As a buyer of these heat lamp stands, before and after the leg changes, I can tell you that the legs are a lot better now. However, the company needs to do something about the screws. While they are self-starting, they often make the holes too big and the screw falls out. They must then be replaced with a bigger screw. A simple change, maybe a self tightening screw would probably help.
Carol K from Virginia
I cannot believe the poor engineering in this stand. It has steel screws going into a tiny hole in the soft plastic legs. The holes will get bigger and bigger, and 2 of mine just stripped to the point where there was no more hold for the threads, making the stand totally unusable, not to mention that you cannot disassemble it and expect to be able to use it again next season. I used to work in aviation engineering and when you had metal fasteners fastening a soft or weak product, you put an INSERT into that product, so the metal had metal-to-metal contact strength. We ended up stacking crates to either side of our brooder and attaching a broom handle with zip ties from which to hang the lamp.
Jodi L from Massachusetts
Best stand going. Holds up well and is very sturdy.