Xtreme Shearing Cutter
Sheep shearing cutter that's been thinned to 3.7mm for Run-in speeds. 4 point cutter with high perfomance right out of the box.
Instructions/Diagrams:
Common Uses
- Sheep
Benefits
Specs
- Run-in, 3.7mm thick
- Made in Switzerland
Troubleshooting
- the comb and cutter are installed as described in the instructions
- the comb name can be read on outside when placed on head
- to have 1/8" space from end of comb (bevel) to tip of cutter
- the edge of the cutter does not go over the side of the comb
- the tension is set correctly
Precautions
Proper Storage
- Remove blades/combs/cutters from clipper or shearing machine.
- Clean blades/combs/cutters immediately after use by using a small brush or blowing off any excess dirt or hair. Cover with oil to reduce risk of rust. High carbon steel clipper blades will rust overnight. Rust will destroy both the edge and polished surface of blades.
- Store clipper/shearer and blades away from solvents, chemicals and moisture. Never leave them where they can be damaged by accidental impact.
Sharpening and Cleaning
- Premier offers an in-house resharpening service for all combs, cutters and blades. Rapid turnaround—most are sharpened within 24 hours.
- To reproduce the quality of the cutting edge on the clipper blades that came from the factory, a lapping machine must be used. Most other methods are, in our experience, inferior. In addition to producing a cutting edge that won’t last, some methods can permanently damage blades. The most common “culprit” is using large high speed grinding wheels that are used to sharpen cutters and combs.
Warning: Clipper blades/cutters/combs that have been sharpened by inferior methods or inexperienced people may be damaged to such an extent that they can never be restored to a satisfactory cutting capability. The same is true of blades that have become too heavily pitted by rust.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Questions? Please call and talk to our consultants at 800-282-6631.
-
Professional Shears
Heiniger Mohair Shearing Comb
Item #862500 -Short bevel shearing comb for Mohair goats. Also used for llamas, alpacas and Angora goats. Swiss-made by Heiniger.
$36.00 -
Professional Shears
Heiniger Camelid Shearing Comb
Item #862600 -Specialized 13-tooth comb for shearing llamas, alpacas, camels, vicuñas and guanacos. Swiss-made by Heiniger.
$51.00 -
Professional Shears
#10 White Clipping Oil, 8 oz bottle
Item #258300 -A high-quality clear clipping and shearing oil to lubricate blades, combs and cutters. Reduces risk of stain to wool fibers and hair.
$4.20 -
Accessories
Premier Comb/Cutter Box
Item #824606 -Use this handy box to keep expensive combs and cutters organized, clean, safe and lubricated.
$3.20 -
Resharpening Service
Resharpen - COMB (each)
Item #870000 -Resharpen your blades, combs or cutters. Rapid turnaround, precision finish, low cost! Custom-engraving available.
$2.00