Skip to content

FREE Ground Delivery on qualified items for orders over $100. Learn More »

Shop Products
0 Items

Catalog Quick Order

Do you know the item # of the product you want to order?

Notice

The item you have selected () is back-ordered and will not be shipped with the rest of your order. If you order now, we will ship it to you as quickly as possible after it arrives.

  or  

Item Not Found

The item you have selected () could not be found. Please check the item # you entered.

P Spring

★ ★ ★ ★ ★ (47) Read reviews »

Used to maintain desired tension on electrified low-tension conductors. For best results, install a P Spring every 1320 ft.

Use with the following conductors:

  • P Spring

    Item #255010 | Weight 0.30 lbs
    In Stock
    $3.10
Videos & Data
How To Install a P Spring Play
How To Install a P Spring
Common Uses
Use to keep rope fences pulled tight.

Specs
  • 1" wide
  • 8.5" long without tension
  • Stretches to 35 lb (half compressed)
  • Stainless steel—so it won't rust

How to Use
  1. Attach one end of spring to a terminal insulator. (The P Spring will simply hook over some insulators; for others, you will need to tie the spring to insulators with rope or wire.)
  2. Attach conductor to other end of spring by taking the loose end of conductor and putting it through open end of spring.
  3. Pull conductor until spring is 1/3 to 1/2 compressed.
  4. Run conductor through the loop one more time and tie off.
  5. Whenever conductor becomes loose, repeat above steps.

Tips
When using electrified rope (any of it), use P Springs and RopeLinks. The goal is to have the P Springs half compressed when everything is all put together.

However, if you don't have a helper to hold the tension on the rope, you may lose too much tension in the process of getting the RopeLink wrapped around the rope.

Solution: Attach the P Spring to the terminal insulator and loop the rope through it twice. Then pull the rope tight so the P Spring is FULLY compressed. When you get the RopeLink attached, you may have lost some of the tension on the rope, but the P Spring is half compressed just like it should be.

Accessories

Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.

Reviews (47)
Average Rating: ★ ★ ★ ★ ★ 4.8 out of 5
Number of reviews: 47 customers reviewed this product.
Recommended: 46 out of 47 said they would recommend this product to a friend.

Write a Review

You must be logged in to leave a review. Please sign in.

P Spring
★ ★ ★ ★ ★

Very easy to use. They really help tighten your fence line. I have deer going back and forth, over and thru, my fencing. These allow for bounce back instead of stretching or breaking electric wire strings and poly rope.

P Spring
★ ★ ★ ★ ★

Worked as described.

P Spring
★ ★ ★ ★ ★

Nice and sturdy.

P Spring
★ ★ ★ ★ ★

One very good product. Used these for tensioning my five strand 3D Deer Fence around the garden. Keeps 6mm IntelliRope nice and tight. Easy to use and the stainless steel construction should give years of great service. Thank you Premier 1 for consistently delivering quality products.

Your products are only surpassed by the awesome customer service I have always been afforded anytime I have called or had a question.

P Spring
★ ★ ★ ★ ★

Perfect for keeping my IntelliRope fence tight. While waiting for my order I purchased one locally and it was NOT useful.