RopeLink 2.6 and 2.45
How to Use
- To work correctly, rope(s) must be overlapped the length of the RopeLink.
- Starting at either end of RopeLink, lay overlapped rope into the first curl.
- Hold link with thumb and finger; with other hand, wrap overlapped rope into the rest of curls.
- After there is tension on the rope, the RopeLink will not slip.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Kurt B from Iowa
These are the absolute best idea!! Simple to use. I used only one to keep (2) 660' wires together for over 4 months. Also the best ever for finishing an electric line so I don't have to tie knots at its end and break the silver wires or have that end from a tie off touch the metal post and short out the line. Always have when checking lines. Best idea ever!
Amy K from Wisconsin
Having done electric fencing before, I was skeptical about how the whole end-post system would work: insulator, p spring, and RopeLink. It was not only extremely easy, but the tension on the rope is great! It’s much easier than using connectors that require tools. I also ran insulated wire under two gates, stripped the ends, and stuck the wire through the loops on the installed RopeLinks. It made a great connection, conducting the charge under the gates. I highly recommend the RopeLinks.
Ginger S from Michigan
These links work like a charm. I tried a few last year and came back for more this year. We rotate our livestock all summer long and I use these to make tightening up a line quick and easy. So long as there is pressure on them - they won’t fail.
Kim G from New York
Super easy to use. Works great.
Kate R from Washington
The most ingenious and effective connector I have ever seen. So easy and satisfying to use that I enjoy having to opportunity to use it. Crazy, right?