Kane Portable Waterer
- Capacity: continuous
- Size: 19"L x 11"W x 4"D
- Suited for: adults
- Number of birds: over 100
- Waterfowl: yes
- Can it hang: no
- Stainless steel cover
How to Use
To refresh water just tip old water out. If required (we’ve never done it) it can be secured to the ground with large, long nails.
Note: The exact number of birds to water is difficult to determine as there are many factors that influence intake; salt and protein levels in the diet, humidity, temperature, productivity (growth or egg production) and the birds ability to process feed and water.
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Tom Y from Minnesota
It’s humorous that the manufacturer couldn’t put TWO wraps of teflon tape on the hose fittings! What would that cost... maybe .003 cents more per unit. YES, I had to take it apart to add more tape so it would not leak. Otherwise I’d give it a five star rating.
A R from Maryland
Update on my earlier review: I was able to purchase replacement float valves from the manufacturer (at $17.80 each, not including shipping). Amazon sells some for less $ but I wasn't 100% certain they would fit. They came without the fittings, which was fine as I don't care for the knurled nut fitting on the hose end on the original waterer (I'd prefer an octagonal one so that I can get a wrench on it). I did purchase some double female threaded pipe to hose connector fittings from Amazon for them. What Amazon sent me was not as pictured - I received fittings with knurled nuts on the hose end, not octagonal ones. If anyone finds themselves in my situation, I recommend Green Thumb brand 1/2" x 3/4" double female threaded pipe to hose connector fittings. Amazon doesn't seem to carry them, but I was able to find some via an internet search.
A R from Maryland
I bought half a dozen of these to use in my pastures for sheep. They work great - until they don't. Two of mine are now clogged. I sure wish the assembly where it attaches to the hose and float valve was available as a spare part - then I could replace the clogged valve. As it is, they're now pretty much useless.
ALSO: I sure wish they had a different fitting where you attach them to a hose. It's a round knurled fitting - very difficult to get a grasp on with a wrench to tighten. As a result many of my hose waterers leaked, developing wet spots in the pasture. I finally went this winter to True Value Hardware and bought proper fittings to replace the ones provided so that I could tighten them properly.
I've been very pleased with most things I've purchased from Premier1, and I recommend your products all the time. This one could stand some fairly simple improvements that should be made by the manufacturer: provide spare parts, and a better fitting.
Sherry D from Texas
I have not had these out very long. They work really good and the chickens have adapted to them quickly.
Jennifer W from Texas
This saves me so much time. I no longer have to worry about my animals running out of water in the heat of summer!