PowerPosts™ Portable Fence Posts
- Both PowerPosts have multiple front loading clips with angled entry for rope, twine, tape or wire. 1/4" rope will need to be fed in from the side
- Stem and base have 3 ribs on each side for strength
- 8" anodized steel step-in spike, 3/8" diameter
- Measurements from bottom of foot peg to center of each clip starting from the bottom going up is as follows:
- 35" post = 1.5", 4.5", 8", 11.5", 15", 20", 22", 26.5", 31", 32.5"
- 48" post = 1.5", 4.5", 8", 11.5", 15", 20", 22", 26.5", 31", 32.5", 44.5", 46.5"
- Set post spike on ground at desired location
- Step on the ledge to push the post into the ground
- Attach conductors at desired height
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
JT M from Massachusetts
This was a repeat order. My "old" posts are at least 5 or 6 yrs old, and still as good as new. My only (minor) beef is that the new ones are not as stiff as the old ones. The good sized foot piece makes them easy to install. This review is for the 48 inch post, but the 35 inch ones are good too.
Elizabeth V from Virginia
The PowerPosts are my favorite for holding polytape fencing for both cattle and horses. I set up semi-permanent pastures with these posts. They are sturdy and work well on slopes and across creeks where the terrain varies a lot. I love them! I’ve had PowerPosts that last for years.
Charles B from Tennessee
Posts are sturdy and went into the ground with no problems. The wire attached with no problem and the posts are what we were looking for.
Vicky R from Texas
These are great! Easy to get in the ground and super sturdy.
Maria B from Virginia
Works as expected, easy to use, durable and maintains integrity of fence.