SmoothCote™ FiberRod Posts (1/2 in. dia.)
Use for temporary fences where stronger posts are needed or in electrified netting at corners and ends.
For many fence situations 3/8" dia. rods are too flexible. For those situations use rods that are 1/2" dia. They’re so much stronger and stiffer.
Use a ScrewOn Rope/Tape Insulator with the post to hold twine, rope and narrow tape.
Don’t forget the drive caps! Prevent hammer damage to tops of posts by placing a protective drive cap on top of the post during installation. One drive cap lasts through years of uses and many posts.
- White in color
- 1/2" diameter
- Lengths: 4, 5, or 6 ft
- Drive Caps (sold separately)
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
Write a Review
You must be logged in to leave a review. Please sign in.
Troy M from Mississippi
Great support rods for my electric fence. Very flexible and rigid at the same time.
Sedgewood P from Mississippi
Phillip E from Colorado
The FiberRods were exactly what I needed. The rods are coated with a protective coating to reduce fiberglass fraying, and it makes it easy to handle the rods without gloves. The 1/2 inch rods have some flex, but are the perfect stiffness for my needs. Premier 1 processed and shipped the order quickly, and I received the rods within a few days.
Lila W from Pennsylvania
I will not use any other post — wood or metal — now that I have switched to these 5-foot by thicker half-inch SmoothCote FiberRods in my tough ground. Well worth the cost.